Results 1 to 4 of 4

Thread: unable to detect cm2100 from flashscan v2

  1. #1
    New Member
    Join Date
    Oct 2020
    Posts
    9

    Default unable to detect cm2100 from flashscan v2

    I ordered a cm2100 off ebay (2018 build date). This is suppose to be for a 2009 cummins 6.7. Seller is unsure if its new or used. Anyway I swapped my ECM with this one and I am unable to detect the ECM. Flashscan is unable to detect it. Swapped my ECM back with the original one and Flashscan can detect.

    So question, is this new ECM no good? Is there a difference between bench flash and in-vehicle flash? This is going into a swapped truck and has a standalone harness (no tipm). I tried using my regular odb2 scanner and nothing. Even the scanguageII doesn't work.


    andy

  2. #2
    Senior Member KhakiCummins's Avatar
    Join Date
    Sep 2011
    Posts
    176

    Default

    If it's a new ECM, I think it needs to be initialized as they are shipped completely blank. I don't think EFILive can do that.
    Duane

    2008 Ram 3500 QuadCab
    Hamilton 110# Springs & HD Pushrods, ARP 2000s, EFILive, SB 3250 DD

  3. #3
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    Are you 100% sure it is a CM2100 ?
    The ECM's would always ship with something in them, if they are 'blank' they would be in bootmode but EFILive can still communicate with them in that state.
    If there is some part numbers on it can you take a photo and post it up.
    I no longer monitor the forum, please either post your question or create a support ticket.

  4. #4
    New Member
    Join Date
    Oct 2020
    Posts
    9

    Default

    I'm pretty sure its cm2100 .. What I'm not sure of is if its new. I have sent the ECM for recovery to optimalwelding.com. We'll know in 2 days if its bricked, damaged, or new and blank.

    what I wasn't sure about before I shipped it was, if its accessible all the time via odb2 even if its blank or unlicensed, or bricked.

    part number is 5258003

Similar Threads

  1. CM2100 High RPM Fueling
    By Twistedshafts in forum Cummins 6.7L
    Replies: 5
    Last Post: October 11th, 2020, 11:01 AM
  2. CM2100 C&C Supported OS
    By beav in forum Cummins 6.7L
    Replies: 6
    Last Post: September 1st, 2020, 12:01 AM
  3. Unable to register flashscan v 1.2
    By moatsman5000 in forum FlashScan V1
    Replies: 6
    Last Post: June 30th, 2018, 01:31 AM
  4. 2008 cm2100 OH ding
    By WPDiesel in forum Diesel
    Replies: 3
    Last Post: May 30th, 2017, 06:26 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •