Results 1 to 10 of 11

Thread: 07.5-13 L92 Intake/Swap

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #11
    Member TorqueMonster007's Avatar
    Join Date
    Aug 2013
    Posts
    51

    Default

    Quote Originally Posted by joecar View Post
    Do you have a wideband connected...?
    I do not yet. Was building a base table but haven't had time to get it on the road yet. I have a Innovate LM-2 I use. Do you see anything that sticks out to you on the modified file vs the original? It wouldn't hardly run with the original. Also cam specs are in the high 220s intake mid 230s exhaust on 112 lsa and around .600
    Last edited by TorqueMonster007; November 30th, 2020 at 06:50 AM.

Similar Threads

  1. L92 swap help needed
    By Lennart in forum Conversions / Aftermarket Parts
    Replies: 11
    Last Post: May 3rd, 2014, 07:48 PM
  2. TCC unlock problem after intake manifold swap
    By Alex99 in forum General (Petrol, Gas, Ethanol)
    Replies: 8
    Last Post: July 9th, 2013, 05:35 AM
  3. Intake and Rocker Swap question with tune
    By Mikz86ta in forum General (Petrol, Gas, Ethanol)
    Replies: 9
    Last Post: July 1st, 2012, 02:11 PM
  4. First EFI build-L92/VVT/E38 with Tremec tko trans swap
    By kball in forum E37, E38 & E67 PFI ECM's
    Replies: 0
    Last Post: February 23rd, 2010, 07:45 AM
  5. LS2 GTO L92/L76 swap
    By robo1 in forum Gen IV V8 Specific
    Replies: 13
    Last Post: April 14th, 2007, 04:59 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •