Hi. Working with a stock LB7 ECM calibration with a V2 and v8.3.1 E54 ECM.

I'm doing logging, and added all the ECM main fuel PIDs available: FUEL_THR_M, FUEL_MAIN_M, MAINRATE, FUELRCALC, all expressed in mm3.

When I try "Link to Scan Tool" for linked tracing of the log within the calibration, there is no PID available in the "Row PID" pulldown for any table that uses "mm3/stroke" on the Y axis, eg. B0720, B1102, etc. I must be missing something simple. The column PID values are available, ie PCM.RPM for the X axis on B1102.

I did a little poking around and v7.5 had a DMX_Link.ini file which called out FUELQ_MAIN_DMA as the correct PID, but that one is not available in the PID list for the E54 ECM.

Thanks for the help.