Results 1 to 3 of 3

Thread: Can't past labels

  1. #1
    Lifetime Member
    Join Date
    Oct 2010
    Posts
    321

    Default Can't past labels

    I am using my V8 to setup some maps. The one i am working on is the MAF table using Hz and the data is EQ error percentage. When I go to the tune and copy with labels then try to past it into the map setup it doesn't past any of the column Axis in. I even tried to do it all manually but it came out all funky, any ideas?

  2. #2
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,490

    Default

    The "column axis" runs across the top and should only contain a single value
    The "row axis" runs vertically down the left and should contain all the frequency values.

    So select the [Row] tab page and click on the [Paste] button to paste the frequency labels.

    Click image for larger version. 

Name:	maf2.png 
Views:	301 
Size:	10.4 KB 
ID:	23623

    Click image for larger version. 

Name:	maf1.png 
Views:	291 
Size:	15.8 KB 
ID:	23624

    Manually configure the column label like this:

    Click image for larger version. 

Name:	maf3.png 
Views:	290 
Size:	10.0 KB 
ID:	23625

    Regards
    Paul
    Before asking for help, please read this.

  3. #3
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Thanks.

Similar Threads

  1. B6612 Labels verification
    By wesam in forum Gen III V8 Specific
    Replies: 2
    Last Post: April 13th, 2018, 02:57 AM
  2. Replies: 3
    Last Post: September 10th, 2012, 02:03 AM
  3. Mislabeling: IFR & IPVA Row Labels
    By RWTD in forum Gen IV V8 Specific
    Replies: 41
    Last Post: April 18th, 2011, 08:55 AM
  4. Map Kpa Labels For 2bar
    By MN C5 in forum General (Petrol, Gas, Ethanol)
    Replies: 16
    Last Post: August 7th, 2005, 03:18 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •