Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: Pro Tuning Enabled

  1. #1
    Senior Member
    Join Date
    Aug 2019
    Posts
    142

    Default Pro Tuning Enabled

    What will pro tuning allow me to do on Cummins ECM and PCMs?

  2. #2
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    Nothing extra, it was more for GM gas ECM's.
    I no longer monitor the forum, please either post your question or create a support ticket.

  3. #3
    Senior Member
    Join Date
    Aug 2019
    Posts
    142

    Default

    I heard that you can flash in a 2018 file into the 2013-2017 trucks. Is this correct? Also is there now user-defined parameters.

  4. #4
    Member
    Join Date
    Jan 2020
    Posts
    53

    Default

    You can flash a 13 to 17 file into an 18 and an 18 file in to a 13 to 17 truck. You should try it. It won't be right....

    User defined parameters is HPTuner lingo. Anything user defined in EFILive is completed with the .cax (or update format) file.

  5. #5
    Junior Member
    Join Date
    Jan 2016
    Posts
    35

    Default

    Quote Originally Posted by whistler View Post
    You can flash a 13 to 17 file into an 18 and an 18 file in to a 13 to 17 truck. You should try it. It won't be right....
    18 file should work fine for 13-18

  6. #6
    Member
    Join Date
    Jan 2020
    Posts
    53

    Default

    Quote Originally Posted by TWITCH02X View Post
    18 file should work fine for 13-18
    I have not witnessed that. I have placed a known good file for a 2015 truck onto a 2018 truck and codes for the MAP and MAF sensor existed. Yes, the MAF and MAP sensor were plugged in. Both trucks were the same trim package and had the same level of modification. I have since modified a 2018 specific file for 2018 trucks.

  7. #7
    Junior Member
    Join Date
    Jan 2016
    Posts
    35

    Default

    Quote Originally Posted by whistler View Post
    I have not witnessed that. I have placed a known good file for a 2015 truck onto a 2018 truck and codes for the MAP and MAF sensor existed. Yes, the MAF and MAP sensor were plugged in. Both trucks were the same trim package and had the same level of modification. I have since modified a 2018 specific file for 2018 trucks.
    I didnt say you could use 15 file in 18 truck, I said you could use 18 file for 13-18

  8. #8
    Member
    Join Date
    Jan 2020
    Posts
    53

    Default

    Quote Originally Posted by TWITCH02X View Post
    I didnt say you could use 15 file in 18 truck, I said you could use 18 file for 13-18
    Wow, pardon my struggles with English... I have not tried an 18 file in a 13 to 17 truck. I will have to give that a go.

  9. #9
    Junior Member
    Join Date
    Jan 2016
    Posts
    35

    Default

    Didn’t mean to sound rude

    I have a 13 and my CTT files have all used an 18 file....

  10. #10
    Member
    Join Date
    Jan 2020
    Posts
    53

    Default

    You weren't rude at all, my ability to understand was low... Very interesting to know, thank you!

Page 1 of 2 12 LastLast

Similar Threads

  1. help! E67 enabled flex....
    By AGRO in forum E37, E38 & E67 PFI ECM's
    Replies: 14
    Last Post: November 24th, 2022, 06:50 PM
  2. Pro Tuning License
    By hacklerjason in forum E98 2014+ Diesel ECM
    Replies: 41
    Last Post: February 18th, 2018, 04:33 PM
  3. Pro Tuning
    By Road in forum FlashScan V2
    Replies: 5
    Last Post: December 16th, 2015, 09:20 AM
  4. Pro Tuning license
    By DURAtotheMAX in forum FlashScan V2
    Replies: 41
    Last Post: February 1st, 2015, 06:03 PM
  5. GEN IV swap AFM is not enabled
    By harascho in forum Gen IV V8 Specific
    Replies: 63
    Last Post: January 29th, 2009, 06:01 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •