Results 1 to 10 of 53

Thread: Collecting links to scattered material...

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Lightbulb Collecting links to scattered material...

    EFILive Support (problems with your FlashScan):
    showthread.php?14547-EFILive-Support

    Where to send your V2 for repairs (if your FlashScan is broken):
    Return Merchandise Authorization (RMA)

    What to Tune Steps:
    showthread.php?t=7867
    showthread.php?t=7866

    Summary Notes:
    showthread.php?14188-Summary-Notes

    Calc.VET and Calc.MAFT:
    Calc-VET-correcting-MAF-and-calculating-VE-(in-single-log)
    Calc-MAFT-correcting-VE-and-calculating-MAF-(in-single-log)-(reverse-of-Calc-VET)
    CALC-VET-Summary-Notes

    Marcin Pohl's Tuning Experiments and Discussions:
    Tuning Tools, Writeups, and Experiments

    Difference-between-Direct-and-Learned-Idle-Airflow:
    Difference-between-Direct-and-Learned-Idle-Airflow

    Configuring units in tunetool:
    Configuring-the-calibration-display-units
    Part-throttle-shift-table-conversion
    Can-you-go-from-C-to-F-degrees

    Configuring units in scantool (set MAP to Metric):
    Scan-tool-match-tune-tool
    Runway-highlighting-not-tracking


    Fixed point quantization (rounding) in tune file:
    showthread.php?p=33495
    showthread.php?t=5856

    Configuring V2 for BBL:
    showthread.php?t=10714

    Updating V2 Firmware:
    showthread.php?t=9375 posts #9 and #10
    showthread.php?t=10014
    showthread.php?t=10304
    showthread.php?13191-Help-updateing-bootblock-from-V2.04.72
    showthread.php?13906-Need-help-getting-my-scantool-tuner-working

    V2 LED meanings:
    showpost.php?p=90297&postcount=22

    Calibrating V2 analog inputs (only if your wideband does not have serial comms):
    showthread.php?t=4593

    Engine Oil Pressure (requires OPS wired to PCM rather than IPC):
    showthread.php?14605-Oil-pressure-PID see post #6

    Fuel Pressure Sensor tutorial:
    showthread.php?t=3661

    VVE Setup Tutorial (E38):
    showthread.php?t=8961

    DSP5 Switch Selectable Tune (Duramax):
    showthread.php?t=3689

    Scripts:
    showthread.php?p=89039#post89039
    showthread.php?p=89090#post89090

    Gen III V8 Engine Management Primer:
    http://carprogrammer.com/Z28/PCM/LS1/Holden_LS1.pdf

    GM Mode 6 Information:
    http://service.gm.com/gmspo/mode6/index.html

    GM TIS Calibration Information:
    http://tis2web.service.gm.com/tis2web

    OBD-II Information:
    http://en.wikipedia.org/wiki/Table_of_OBD-II_Codes
    http://www.epa.gov/obd/questions.htm

    OBD-II Diagnostic Trouble Codes (DTC's):
    http://www.ls2.com/forums/showthread...rd_Diagnostics
    http://www.gearchatter.com/
    http://www.stengel.net/diccodes.htm C5 DTC codes

    Replacing a PCM:
    showthread.php?t=5958

    Parts Install Tutorials:
    http://www.ls1howto.com/
    http://www.installuniversity.com/ins...sity/index.htm

    Diagnostics using an Oscilloscope:
    http://www.picoauto.com/automotive-library.html
    http://www.autonerdz.com/cgi/yabb2/YaBB.pl


    Attached Files Attached Files
    Last edited by joecar; June 3rd, 2016 at 08:51 AM. Reason: Constantly adding links...

Similar Threads

  1. Replies: 5
    Last Post: January 8th, 2010, 04:53 AM
  2. My V2 is just collecting dust...
    By Teutonic Speedracer in forum FlashScan V2
    Replies: 132
    Last Post: October 22nd, 2007, 07:23 AM
  3. Local sections?
    By Stangkiller in forum Lounge
    Replies: 7
    Last Post: September 18th, 2006, 01:47 AM
  4. Links to software suggestions...
    By joecar in forum General (Petrol, Gas, Ethanol)
    Replies: 1
    Last Post: May 22nd, 2006, 01:52 AM
  5. Links to widebands that will work with Flashscan/EFIL please
    By DebianDog in forum General (Petrol, Gas, Ethanol)
    Replies: 8
    Last Post: February 17th, 2004, 03:22 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •