Results 1 to 10 of 18

Thread: Linking Scan Tool To Editor

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Lifetime Member Ninety8C5's Avatar
    Join Date
    Sep 2003
    Posts
    452

    Default Linking Scan Tool To Editor

    In Version 7.5, I used a file E92_link.ini to link parameters between Scan Tool and the Editor. Is there a similar file to do this with the V8 Editor ? The reason I ask is that I changed the column information for the VE table to a calculated PID for Map/Barometer.

    Thanks,
    Walter

    I read in the V8 Manual to right click in the Table (B8101, B8103 & B8105) and then Edit Column, Edit Row, etc. are changeable. When I do that the Edit Column is greyed out. The Column needs to be changed for those Tables from ECM.AFRATIO_M to a Calculated PID VVE.MAP_BARO.
    Last edited by Ninety8C5; February 25th, 2021 at 09:11 AM.

Similar Threads

  1. Scan and tune linking (HELP!)
    By amishmafia00 in forum Cummins 5.9L
    Replies: 2
    Last Post: July 18th, 2016, 10:12 AM
  2. Linking Scan Log To Tune File Maps
    By The Alchemist in forum E37, E38 & E67 PFI ECM's
    Replies: 2
    Last Post: July 30th, 2007, 06:33 PM
  3. linking scan data to tune file
    By a78turbo in forum Duramax LLY
    Replies: 3
    Last Post: March 14th, 2006, 04:53 PM
  4. Problems linking the scanner and the editor
    By Dirk Diggler in forum General
    Replies: 13
    Last Post: May 26th, 2005, 04:42 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •