Results 1 to 5 of 5

Thread: Dodge Cummins 2350B delete

  1. #1
    Junior Member
    Join Date
    Oct 2017
    Posts
    10

    Default Dodge Cummins 2350B delete

    Hi all
    I can do deletes with on lml etc, but when i load stock ctz from cummins i dont have nothing in tables. is there other 3rd software to edit the files for delete and power ?

  2. #2
    Junior Member
    Join Date
    Oct 2017
    Posts
    10

    Default

    Click image for larger version. 

Name:	Screenshot 2021-02-23 21.05.21.png 
Views:	261 
Size:	89.6 KB 
ID:	23668

    This it what i see when i open ctz from cummins, i dont have any maps or system

  3. #3
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    EFILive has never had parameters to do deletes on these Cummins ECM's.
    I no longer monitor the forum, please either post your question or create a support ticket.

  4. #4
    Junior Member
    Join Date
    Oct 2017
    Posts
    10

    Default

    Yes but it even not open the normal maps boost/timing/torque limiters etc..

  5. #5
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    Actually that is a bug in the particular version of V7 you have there. You should be getting message that the OS is not supported.
    Reason being is Dodge must have replaced it with a newer calibration between EFILive software releases, we don't tend to go back and map every known OS on these ECM's because there is simply too many to do.
    I no longer monitor the forum, please either post your question or create a support ticket.

Similar Threads

  1. Dodge ram 2350B
    By sohaib in forum Cummins 6.7L
    Replies: 6
    Last Post: January 22nd, 2020, 03:28 AM
  2. Cummins 2350B
    By got boost? in forum Cummins 6.7L
    Replies: 0
    Last Post: January 17th, 2020, 08:47 PM
  3. Replies: 1
    Last Post: May 19th, 2019, 09:09 AM
  4. Change VIN to older Dodge or non Dodge?
    By Master_Chase in forum Cummins 5.9L
    Replies: 2
    Last Post: July 26th, 2017, 03:14 PM
  5. Replies: 1
    Last Post: June 28th, 2017, 10:41 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •