All my software, FlashScan v2 is up-to-date but I can't get it to work with the 2019+ Ram 6.7L. Don't see any CM2450 CMF options at all. What am I possibly missing here?
All my software, FlashScan v2 is up-to-date but I can't get it to work with the 2019+ Ram 6.7L. Don't see any CM2450 CMF options at all. What am I possibly missing here?
"Don't see any CM2450 CMF options at all." What are you trying to do, scan, tune?
I no longer monitor the forum, please either post your question or create a support ticket.
Scan. Looks like I’m the documentation there should be some PIDs I can set for scan and logging on the v2 but nothing comes up with CMF, stops at CME.
V8 allows some generic PID's to be logged, but for these ECM's it is mainly based on EDA logging which does mean the ECM needs to be running a CSP5 OS, not the normal OEM OS.
I no longer monitor the forum, please either post your question or create a support ticket.
So can only be done when on pass-through with the v2 and v8 software? I didn’t use a CSP OS on the truck.
No, you can program the PID's into the V2 using V8 for BB logging. But the PID's aren't great on the CMF which is why we did EDA (where possible).
I no longer monitor the forum, please either post your question or create a support ticket.