Results 1 to 6 of 6

Thread: Up-to-date FlashScan v2 Won't Work With 2019+ Ram

  1. #1
    Senior Member Jim P's Avatar
    Join Date
    Nov 2019
    Posts
    120

    Default Up-to-date FlashScan v2 Won't Work With 2019+ Ram

    All my software, FlashScan v2 is up-to-date but I can't get it to work with the 2019+ Ram 6.7L. Don't see any CM2450 CMF options at all. What am I possibly missing here?

  2. #2
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    "Don't see any CM2450 CMF options at all." What are you trying to do, scan, tune?
    I no longer monitor the forum, please either post your question or create a support ticket.

  3. #3
    Senior Member Jim P's Avatar
    Join Date
    Nov 2019
    Posts
    120

    Default

    Scan. Looks like I’m the documentation there should be some PIDs I can set for scan and logging on the v2 but nothing comes up with CMF, stops at CME.

  4. #4
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    V8 allows some generic PID's to be logged, but for these ECM's it is mainly based on EDA logging which does mean the ECM needs to be running a CSP5 OS, not the normal OEM OS.
    I no longer monitor the forum, please either post your question or create a support ticket.

  5. #5
    Senior Member Jim P's Avatar
    Join Date
    Nov 2019
    Posts
    120

    Default

    So can only be done when on pass-through with the v2 and v8 software? I didn’t use a CSP OS on the truck.

  6. #6
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    No, you can program the PID's into the V2 using V8 for BB logging. But the PID's aren't great on the CMF which is why we did EDA (where possible).
    I no longer monitor the forum, please either post your question or create a support ticket.

Similar Threads

  1. 2019 Ram RSA
    By Road in forum Cummins 6.7L
    Replies: 14
    Last Post: September 8th, 2019, 06:18 PM
  2. I would like to beta test for the 2019 Ram 2500 6.7L Cummins.
    By CumminsTwang in forum Do you want to be a Beta Tester?
    Replies: 3
    Last Post: August 5th, 2019, 12:47 AM
  3. May 2019, Beta Release (Updated May 30, 2019)
    By Blacky in forum Software Updates and Installation Help
    Replies: 0
    Last Post: May 28th, 2019, 03:43 PM
  4. New PCM, A/C won't work and it's 104!
    By puddlestomper in forum Duramax LB7
    Replies: 23
    Last Post: August 31st, 2013, 03:50 AM
  5. VDASH won't work
    By zacksfoam in forum FlashScan V2
    Replies: 1
    Last Post: August 14th, 2009, 04:04 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •