Results 1 to 10 of 10

Thread: CM2350F 68RFE Base File

  1. #1
    Senior Member
    Join Date
    Aug 2019
    Posts
    127

    Default CM2350F 68RFE Base File

    In search of a known good base file. OS doesn't matter but do need it to be able to convert over to a CSP file, please.

  2. #2
    Junior Member
    Join Date
    Nov 2019
    Posts
    11

    Default

    I have all basefiles, If you know the exact number I can get it for you.

  3. #3

  4. #4
    Senior Member
    Join Date
    Aug 2019
    Posts
    127

    Default

    Thank you

  5. #5
    Member Jim P's Avatar
    Join Date
    Nov 2019
    Posts
    94

    Default

    Seems the CM2350F single tune file won’t open in v7.5 anymore, most recent software update. The CSP4 versions open though. Anyone else experience this?

  6. #6
    Lifetime Member
    Join Date
    Nov 2005
    Posts
    1,760

    Default

    Newly supported operating systems are only supported in V8


    Sent from my iPad using Tapatalk
    I no longer monitor the forum, please either post your question or create a support ticket.

  7. #7
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,166

    Default

    Quote Originally Posted by Jim P View Post
    Seems the CM2350F single tune file won’t open in v7.5 anymore, most recent software update. The CSP4 versions open though. Anyone else experience this?
    Which file are you referring to? The one posted above or a different one?

    Cindy is correct in that new OS's are only being added into V8 from now on, however there hasn't been many (maybe any) for the CM2350F added since we made that decision (the last OS addition for CM2350F was Feb 2020).
    The 2018 OS release run down is like this:
    32.18.01.00 - Supported
    32.18.02.02 - NOT Supported
    32.18.03.03 - NOT Supported
    32.18.04.04 - Supported

    And that is just a timing thing that the middle two got replaced pretty quick, by the time we got around to needing to map them 32.18.04.04 was already out and being flashed into vehicles by the dealers.
    I no longer monitor the forum, please either post your question or create a support ticket.

  8. #8
    Member Jim P's Avatar
    Join Date
    Nov 2019
    Posts
    94

    Default

    The 32.18.01.00. I used to be able to open it in v7.5 now just the CSP version will open. Had the 32.18.01.00 open in v8. Thought maybe something was wrong with my copies or something.

  9. #9
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,166

    Default

    I have the V7.5 version posted HERE installed and that file above "32.18.01.00 - DO90066.03 32370831AD 2018 DJ D2 6.7L 68RFE 50S CM2350F.ctz" opens up just fine.
    What is the message on the screen when you try and open it?
    I no longer monitor the forum, please either post your question or create a support ticket.

  10. #10
    Member Jim P's Avatar
    Join Date
    Nov 2019
    Posts
    94

    Default

    I got the .34 version installed. The above file gives me "Unrecognized PCM" message as does all my copies and even when I xCal the DO90066.03. I'll update to the .35 and try it.

Similar Threads

  1. CM2350A base file
    By marky244 in forum Cummins HD
    Replies: 0
    Last Post: January 2nd, 2020, 02:55 PM
  2. base file for an 02 camaro
    By C Murda in forum Gen III V8 Specific
    Replies: 2
    Last Post: June 3rd, 2017, 11:03 AM
  3. 2012 C6 M6 Base Model - Need base file!
    By GR8GAME in forum Gen IV V8 Specific
    Replies: 2
    Last Post: April 4th, 2016, 04:44 AM
  4. Aisin trans file into 68RFE ECM?
    By LBZoom in forum Cummins 6.7L
    Replies: 0
    Last Post: August 23rd, 2014, 04:15 PM
  5. need a base tun file for a 98 C5 with...
    By JimM in forum Gen III V8 Specific
    Replies: 2
    Last Post: April 24th, 2007, 12:49 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •