Results 1 to 2 of 2

Thread: "wakeup serial data" LMM stand alone harness

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Junior Member
    Join Date
    Apr 2021

    Default "wakeup serial data" LMM stand alone harness

    I am getting P2536, U0140 and U0121 codes, I have found some reference to P2536 being the absence of 5V or greater on pin 43 of the TCM in the accessory position (signal comes from the BCM which of course is no longer there), there is no connection from the accessory terminal of the ignition switch and the stand alone harness, there is zero volts on pin 43 in any ignition position, is this correct?
    I have U0140 deleted from the ECM DTCs but cannot find U0121 or P2536 in the tune and in any case I am still getting the U0140 code.
    Last edited by Papalote; May 13th, 2021 at 01:25 PM.

Similar Threads

  1. Replies: 9
    Last Post: November 7th, 2018, 02:07 PM
  2. "2.2 ecotec E37 stand alone No START"
    By fjs6 in forum E37, E38 & E67 PFI ECM's
    Replies: 1
    Last Post: March 29th, 2012, 04:52 AM
  3. "Attached PCM's serial number is missing"
    By the Dragon in forum Gen III V8 Specific
    Replies: 1
    Last Post: December 4th, 2011, 08:47 PM
  4. Replies: 3
    Last Post: March 6th, 2011, 02:12 PM
  5. EFILive "Classic"/"Legacy"/"Historic"?
    By emarkay in forum FlashScan V2
    Replies: 6
    Last Post: November 2nd, 2008, 02:48 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts