Results 1 to 3 of 3

Thread: CSP5 on New Truck

  1. #1
    Junior Member
    Join Date
    Feb 2018
    Posts
    15

    Default CSP5 on New Truck

    Ok, I sold my old truck and got a new mega cab. Same year model 2006. Auto, 4x4 etc.

    My question is this, I was running the CSP5 tunes on my old truck, and I had done the upgrading one of the approved stock tunes to the CSP5. Do I need to start all over with the new truck, by flashing it with the clean stock tune that is upgradable and then upgrade that tune and flash it again, or can I simply change the VIN in my tunes I was using on my old truck with the CSP5 tunes and switch and flash them on the new truck and go from there, thanks!

  2. #2
    Lifetime Member comnrailpwr's Avatar
    Join Date
    Jun 2011
    Posts
    456

    Default

    As long as both are autos it shouldn't cause any issues. Change vin, flash and go. It's pretty rare for mix matching operating system to cause problems on the pre 2010 trucks. It's worth a shot.

    Sent from my SM-G970U using Tapatalk

  3. #3
    Junior Member
    Join Date
    Feb 2018
    Posts
    15

    Default

    Thanks!

Similar Threads

  1. Csp5 for 6.7L?
    By billybob in forum Cummins 6.7L
    Replies: 42
    Last Post: November 17th, 2014, 04:42 PM
  2. 6.7 csp5 help
    By lmhenderson93 in forum Cummins 6.7L
    Replies: 1
    Last Post: October 3rd, 2013, 10:38 AM
  3. Csp5
    By easymon in forum Cummins 5.9L
    Replies: 5
    Last Post: July 21st, 2013, 03:33 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •