Originally Posted by
98WhiteDevil
I'm running speed density on my 98 TA. I've been tuning the car for a while and have it dialed in pretty good for regular driving. My question is how do I tune it for WOT? When at WOT sometimes the A/F will be anwhere between 11.0-13.0, how do I dial this in to the correct A/F. When I did my first round of VE tuning after adding 15% to the tables, I was able to take the car up past 4,000 rpm's to accomodate these cells. Now when I turn off LTFT's and tune the VE's, I can't take it past 4,000 rpms because it's too lean for those rpm's. How do I dial in the higher rpm's,