I'm having a lot of trouble tuning a '04 LQ9 with mild cam and a 1M 411. Its a transplant to a 71 Chevy pickup. O2 info and fuel trims just don't agree. Previous experience with a half meg 411 showed that on a cold non-running engine (after sitting over night) the O2s would start at 450 mVolt and drop to about 50 mVolt in about a minute after the ignition is turned on. What I'm seeing with this 1M 411 is that on a cold non-engine (after sitting over night) the O2s start at 0 mVolt and raise up to 450 mVolt (after using the DVT controls to turn the heaters on). Shouldn't the O2s behave the same, i.e. start at 450 mVolt and drop to near zero volts as the O2s warm up when sampling relatively fresh air?