Results 1 to 7 of 7

Thread: Injector PW Issue

  1. #1
    Member
    Join Date
    Aug 2016
    Posts
    90

    Default Injector PW Issue

    Hi all,

    I took a scan today on a quick 15 minute drive, and I noticed something strange with Inj PW values, bank to bank. My pulse width values are different from bank 1 to bank 2 of anywhere from 40% to almost 80%, and I'm in Open Loop so there should be no reason for the difference as far as I can see. I've attached my tune file, in case anyone could have a quick look, and a snip of the log that shows the difference. I've gone over the tune and don't see anything obvious, although I'm still relatively new to this.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	Injector Scan.png 
Views:	95 
Size:	150.7 KB 
ID:	23884  
    Attached Files Attached Files
    Last edited by RC1; September 17th, 2021 at 08:32 AM. Reason: Added attachment

  2. #2
    Member
    Join Date
    Aug 2016
    Posts
    90

    Default

    Okay so after reading through some previous threads, I figured I'd try and disconnect both NB O2's, and voila no more bank to bank differences. So I guess I'm to assume that even though I'm in Open Loop with no LTFT, the STFT's still try and adjust?!

  3. #3
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Post some log files.

  4. #4
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Swap NBO2's across banks and see if injector pulsewidths follow the NBO2's.

  5. #5
    Member
    Join Date
    Aug 2016
    Posts
    90

    Default

    Quote Originally Posted by joecar View Post
    Swap NBO2's across banks and see if injector pulsewidths follow the NBO2's.
    Hi Joe,

    I did previously swap the O2's side to side because of what I saw, and the odd reading followed the sensor, so I suspect I may have a bad one. Interesting thing is that I bought new NTK's from a reliable source so I wouldn't have to worry about this kind of stuff. Once I figured out that I had a possible bad sensor, I decided to look into the STFT issue, which is when I found the old thread that mentioned unplugging the O2's. As soon as I did that, everything evened out as far as PW's go.

  6. #6
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Do you have a link to the old thread you read, I'm trting to find it.

  7. #7
    Member
    Join Date
    Aug 2016
    Posts
    90

    Default

    Quote Originally Posted by joecar View Post
    Do you have a link to the old thread you read, I'm trting to find it.
    https://forum.efilive.com/showthread...highlight=stft

Similar Threads

  1. Issue with minimum injector pulse
    By TransAm-Z in forum General (Petrol, Gas, Ethanol)
    Replies: 0
    Last Post: April 27th, 2014, 12:27 AM
  2. Injector or EFI Issue...or both?
    By TNRGreene in forum Duramax LLY
    Replies: 6
    Last Post: January 23rd, 2013, 08:32 AM
  3. E67 Injector Bank pulswidth Value issue.
    By railheadwrench in forum E37, E38 & E67 PFI ECM's
    Replies: 3
    Last Post: November 15th, 2011, 06:55 AM
  4. Noob with LB7 injector issue
    By Mr.Duck in forum Diesel
    Replies: 0
    Last Post: September 12th, 2011, 09:53 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •