Results 1 to 4 of 4

Thread: problems logging a 07 c6zo6/ls7

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Senior Member
    Join Date
    Nov 2014
    Posts
    192

    Default problems logging a 07 c6zo6/ls7

    i had no problems with the 99 c5/ls1. here some weird stuff going on:

    1) sae.tp is btwen 25 and 88

    2) calc.injdc2 is between 80 and 3214 (%)

    3) gm.ibpw2 is between 23 and 610 ms

    @6000 rpm ibpw is 600 ms and indc is 3000

    4)gm.engoilp goes to a max. of 6 bars, dips after closing throttle and then jumps to 7 bar. is this real?

    gm.eosp and calc.eosp are identical and do the same (3.4 → 3.7 v). is oilpressure measured or calculated?

    oil temperature is in the other thread. i assume trans/diff temp. cant be logged, right?

  2. #2
    Lifetime Member minytrker's Avatar
    Join Date
    Jan 2006
    Posts
    1,332

    Default

    E38 uses different pids, your not logging the correct ones.

  3. #3
    Senior Member
    Join Date
    Nov 2014
    Posts
    192

    Default

    thank you, but what pids should i be logging? they are all validated and i dont see any other ones. e.g. sae.tp-b is the same.

  4. #4
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    For E38 use GM.ETCTP, and GM.INJPW1 and 2 (there are only 2 pids named like this)... you will need a calc pid for DC%.

Similar Threads

  1. Lagging Problems in Logging
    By LSs1Power in forum FlashScan V2
    Replies: 11
    Last Post: July 10th, 2010, 04:48 PM
  2. LMM logging Problems
    By duramaximizer in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 4
    Last Post: August 25th, 2009, 12:08 PM
  3. start problem with cammed c6zo6
    By chrleb2 in forum Gen IV V8 Specific
    Replies: 10
    Last Post: December 11th, 2008, 04:46 PM
  4. Logging on a 02 LL8 problems
    By ScarabEpic22 in forum Black Box Logging
    Replies: 22
    Last Post: October 7th, 2007, 05:00 PM
  5. 7.3.0 Patch 10 Logging Problems?
    By BowlingSS in forum General
    Replies: 10
    Last Post: October 10th, 2005, 08:40 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •