Results 1 to 2 of 2

Thread: V8 Scanner Wideband input to EGR Calculated PID

  1. #1
    Lifetime Member
    Join Date
    Mar 2006
    Posts
    611

    Default V8 Scanner Wideband input to EGR Calculated PID

    Ive been using V7.5 with serial wideband input for years.
    Trying to get this V8 software figured out with a buddys V3 on a turbo truck.
    Since we dont have the connector for the V3 to get serial input i am trying to get the Wideband input to the EGR pin in the PCM.
    I have it wired up and EGR voltage is showing in the scanner now.
    But i havent figured out how to do the calculated PID to do the EGR Voltage to AFR.
    I need some help haha.
    Apparently not many folks are talking about the V8 software much on the forums.

  2. #2
    Lifetime Member
    Join Date
    Mar 2006
    Posts
    611

    Default

    Anybody?

Similar Threads

  1. Analog voltage input not reading in scanner
    By Jacob lowe in forum Petrol / Gas
    Replies: 15
    Last Post: September 5th, 2015, 01:20 PM
  2. check my calculated pid
    By ddnspider in forum Gen III V8 Specific
    Replies: 9
    Last Post: March 26th, 2014, 03:02 AM
  3. Input on Wideband Commander hookup.
    By John02SS in forum General (Petrol, Gas, Ethanol)
    Replies: 9
    Last Post: August 19th, 2009, 02:03 AM
  4. New problem with V2 serial wideband input
    By thunder550 in forum FlashScan V2 BB Logging
    Replies: 7
    Last Post: June 4th, 2008, 02:02 PM
  5. Calculated PID's
    By Jason S. in forum General (Petrol, Gas, Ethanol)
    Replies: 7
    Last Post: March 17th, 2007, 08:55 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •