Results 1 to 4 of 4

Thread: 6.0 tuning

  1. #1
    Member
    Join Date
    Dec 2005
    Posts
    62

    Default 6.0 tuning

    Are there any basic thing an newbie can change to make a 6.0 have a little more power and get better fuel milage?

  2. #2
    EFILive Reseller ringram's Avatar
    Join Date
    Oct 2005
    Posts
    1,411

    Default

    LS2, L76, L98 etc engines/pcm's are not yet supported by efilive.
    So the usual bolt on hardware mods is all you are able to use unless you use competitors products.
    Get EFILive in europe (http://www.efilive.eu).
    2007 Escalade ESV L92 6.2L VVT.
    2014 VF SV LS3 Maloo.

  3. #3
    Junior Member m396 #00-011's Avatar
    Join Date
    Oct 2003
    Posts
    24

    Default

    LS derivitive 6.0's he can tune. I've got one in the truck...tuned.

    As for fuel mileage, you can lean it out some at cruise, and just make sure your tune is good, and not overly rich.
    Jason Woolverton
    2000 Mallett FRC
    2003 Silverado SS
    Mallett 396's Garage

  4. #4
    Member
    Join Date
    Dec 2005
    Posts
    62

    Default

    Quote Originally Posted by m396 #00-011
    LS derivitive 6.0's he can tune. I've got one in the truck...tuned.

    As for fuel mileage, you can lean it out some at cruise, and just make sure your tune is good, and not overly rich.
    m396 #00-011 I see your not far from me. Any chance you can give me some pointers on Gas engine tuning

Similar Threads

  1. 08 Silverado 5.3 Tuning, tuning-spark/pe mode/
    By hulm333 in forum Gen IV V8 Specific
    Replies: 1
    Last Post: November 16th, 2009, 04:44 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •