Results 1 to 4 of 4

Thread: Cant see cax transient fueling

  1. #1
    Junior Member
    Join Date
    Mar 2014
    Posts
    42

    Default Cant see cax transient fueling

    Hi,
    hope someone can help.
    installed new injectors fic 60lb and corrected data in tune.
    ran it up and running very rich on no load.at 12 afr at idle.

    Read here and efilive forum may need cax files to get table b9021.?
    downloaded and copied cax file for my operating system on my LS1B to correct place in laptop.
    have reopened file hoping to see b9021, still not there...
    went into properties in efilive and ticked two boxes to allow cax files.
    still no b9021 table not found. Have seen transient fueling new tab but no b9021
    When it loads up with cax file in correct place it brings up message but no mention of above
    Any ideas?
    banging head against brick wall.
    regards
    gavin

  2. #2
    Junior Member
    Join Date
    Mar 2014
    Posts
    42

    Default

    Ok was using wrong cax, have now seen b9021 and set same as b4003 and b4004 at 0.125. Will see how it goes now...

    Link for cax was https://forum.efilive.com/showthread...01250003/page2
    Regards
    Gav

  3. #3
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Hi Gav,

    Glad you got it sorted out.

    Which OS do yoi have?

  4. #4
    Junior Member
    Join Date
    Mar 2014
    Posts
    42

    Default

    Hi Joe,
    COS3 , needed cax file b from above link, not tried it yet though, have set b9021 to 0.125 same as other tables. Hoping it will fix rich idle...
    Regards
    Gav

Similar Threads

  1. Replies: 8
    Last Post: October 19th, 2012, 03:56 AM
  2. B9021 Transient .cax file how to add it?
    By hotrod in forum CAX Files
    Replies: 1
    Last Post: October 19th, 2012, 03:10 AM
  3. B9021 Transient .cax file reversal
    By bad boyz racing in forum Gen III V8 Specific
    Replies: 5
    Last Post: September 24th, 2012, 02:46 PM
  4. Will changing the VE map alter accel pump/transient fueling?
    By Supercharged111 in forum Vortec V6/V8 Specific
    Replies: 6
    Last Post: June 18th, 2009, 07:10 PM
  5. Transient Fueling and CFCO Settings
    By swingtan in forum E37, E38 & E67 PFI ECM's
    Replies: 12
    Last Post: June 11th, 2008, 08:53 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •