Results 1 to 5 of 5

Thread: PID Display Questions on the V2

  1. #1
    New Member
    Join Date
    Nov 2021
    Posts
    7

    Default PID Display Questions on the V2

    Hello, apologies in advance- haven't used forums before- not sure if Im in the right area. And Im a little bit challenged with PC stuff so simple advice wont offend!

    I have the EFI Live V2 in my Jetsprint Boat and had some questions about the display of PIDS on the v2 itself. etc

    1. I wanted to reorder the display to group the ECT. EOPS EGRS ( Fuel Pressure) Voltage and WO2AFR1 to the start up Screen and Im not sure how to do that. Can anyone point me in the right direction?
    2. Im not sure if its possible but can the EOPS be changed to display oil Pressure in PSI ( on the V2 ) along with the EGRS to show fuel pressure in PSI? Ive been told that when connected to PC you can see these values but i just want to see them when warming up boat on trailer before going out for a run.
    3. The EGRS PID- I used to have that on this device- how can i re add it

    Ive attached pictures of current PID Display.

    Thankyou in advance and have a nice day where ever in the world you are.

    BrianClick image for larger version. 

Name:	V2 Flounder3.jpg 
Views:	116 
Size:	311.7 KB 
ID:	23963Click image for larger version. 

Name:	v2 Flounder2.jpg 
Views:	127 
Size:	230.4 KB 
ID:	23964Click image for larger version. 

Name:	V2 Flounder1.jpg 
Views:	116 
Size:	252.3 KB 
ID:	23965

  2. #2
    Lifetime Member
    Join Date
    Mar 2006
    Posts
    570

    Default

    Connect V2 to your computer
    Open EFI Live V8 Scan and Tune program
    Select F5: BBX on the left side
    At the bottom click on the Read button with the Green Up Arrow
    This reads the settings off your V2
    Save as your file name

    Organize you PIDs
    Save as a new file name and Click on Program Red Down Arrow at the bottom.

  3. #3
    New Member
    Join Date
    Nov 2021
    Posts
    7

    Default Thankyou Nonnieselman

    Quote Originally Posted by nonnieselman View Post
    Connect V2 to your computer
    Open EFI Live V8 Scan and Tune program
    Select F5: BBX on the left side
    At the bottom click on the Read button with the Green Up Arrow
    This reads the settings off your V2
    Save as your file name

    Organize you PIDs
    Save as a new file name and Click on Program Red Down Arrow at the bottom.
    Heh thanks for that!! I will get onto that when i get home- that will really help. Any thoughts on the other questions- ie adding the EGRS and displaying the EOPS and EGRS in PSI ? Cheers

  4. #4
    Lifetime Member
    Join Date
    Mar 2006
    Posts
    570

    Default

    Sorry ive never done that so i have no idea what to suggest.

  5. #5
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    More info:
    Setting-up-a-FSV2-from-scratch
    https://service.efilive.com/kb/artic...utocal-for-bbx


    EOP in psi will require a calc pid:
    Engine-Oil-Pressure-PID
    That's using V7, so you would have to do that in V8 using the pid config window.
    Last edited by joecar; November 22nd, 2021 at 04:08 PM.

Similar Threads

  1. V8 Scan Tool - Display Calc PID's on Charts
    By PHLTHS in forum V8 Tune Editor
    Replies: 5
    Last Post: November 4th, 2020, 06:53 PM
  2. Calc pid to display previous frame value (delay data)
    By Gelf VXR in forum General (Petrol, Gas, Ethanol)
    Replies: 4
    Last Post: February 13th, 2017, 02:25 AM
  3. V2 display after selecting a pid list...
    By joecar in forum FlashScan V2 BB Logging
    Replies: 0
    Last Post: October 30th, 2008, 08:33 AM
  4. PID questions.
    By DmaxHawk in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 0
    Last Post: September 23rd, 2008, 09:43 AM
  5. scantool display to use as dash display?
    By ace68 in forum Lounge
    Replies: 0
    Last Post: March 3rd, 2006, 05:50 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •