Results 1 to 5 of 5

Thread: external ad setup

  1. #1
    Junior Member
    Join Date
    Dec 2018
    Posts
    10

    Default external ad setup

    so Id like to setup an external analog input but do not know where to start. I understand that there is a calc_pids.txt? I am using a flashscan v3 and I cant seem to figure out how to enable external input.

  2. #2
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,189

    Default

    Which wideband do you have...?

    As far as I can tell, looks like V3 requires wideband to be connected via serial comm or CAN (in the case of AEM -0333/0334).
    More info:
    https://service.efilive.com/kb/artic...g-flashscan-v3
    https://service.efilive.com/kb/articles/pin-assignments
    https://service.efilive.com/kb/artic...-specification

    Let me check and get back to you.

  3. #3
    New Member
    Join Date
    Aug 2018
    Posts
    3

    Default

    I have the same question for my Ballenger AFR500 V2, it only has analog output.

    The Pin assignments article listed above say the are for serial rx-tx and tx-rx inputs, nothing mentioned about analog.

  4. #4
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,189

    Default

    FSV3 does not have analog inputs.

    The Ballenger should have CAN bus and/or serial comm connection ability, FSV3 will be able to connect to it either way.

    Post the user manual pdf for the Ballenger.

  5. #5
    New Member
    Join Date
    Aug 2018
    Posts
    3

    Default

    Thanks for the reply
    I know their next version has will work: AFR 500CAN
    Attached Files Attached Files

Similar Threads

  1. Using external sensors with V2
    By jordylee18 in forum FlashScan V2
    Replies: 2
    Last Post: June 23rd, 2013, 02:13 PM
  2. Replies: 13
    Last Post: July 14th, 2012, 02:07 AM
  3. HELP! No external voltage!
    By gotabav in forum General (Petrol, Gas, Ethanol)
    Replies: 15
    Last Post: May 13th, 2008, 09:52 PM
  4. External input
    By heavymetals in forum External A/D inputs
    Replies: 4
    Last Post: May 2nd, 2006, 03:44 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •