Results 1 to 2 of 2

Thread: Compoud turbo help on 6.7 cummins

  1. #1
    New Member
    Join Date
    Dec 2021
    Posts
    5

    Default Compoud turbo help on 6.7 cummins

    Hello i have tuned before but i do want a starting point for some timing on a compound setup. Its a 6.7 cummins has a good amount of work done the compounds will be a gated s367 with a s475/96/1.32 id just like some pointers so if you have some pm me.

  2. #2
    Junior Member
    Join Date
    Jul 2022
    Posts
    19

    Default

    Do you already have the VGT portion taken care of? If so then you're stock fueling should be a good starting point.

    I'm not sure how much you've done in the past so take this for whatever it might be worth to you, but if you're running bigger injectors obviously take care of your scaling then you might want to decrease your fueling quantities down low on top of the correction. While a 367 is not a massive jump over the stock vgt, it will add some lag and smoke in the lower RPMs depending on a few variables. Another note, pulling a bit of timing below 1500r-1800rpm might help just a tad with getting on top of the chargers but you'll have to test to figure out what you like and what you're aiming for.

    Hopefully that helps, do some testing and let us know how it goes.

Similar Threads

  1. Turbo Swap
    By hacklerjason in forum E98 2014+ Diesel ECM
    Replies: 7
    Last Post: May 28th, 2019, 05:33 PM
  2. New to cummins - Where can I get stock cummins files?
    By GabrielMga in forum Cummins 6.7L
    Replies: 21
    Last Post: July 7th, 2016, 11:20 PM
  3. Turbo 5.3 Help
    By BigCE in forum Gen III V8 Specific
    Replies: 5
    Last Post: September 1st, 2015, 03:30 AM
  4. Gen 3 5.3L ON3 turbo, my first turbo tune, any help
    By 400ss in forum Forced Induction and Nitrous Oxide (N20)
    Replies: 4
    Last Post: September 26th, 2014, 04:52 AM
  5. Closing turbo vanes for turbo braking?
    By Haulinbass02 in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 19
    Last Post: May 14th, 2009, 11:12 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •