Yes I'm already using the latest updates on my Laptop for my V2 and V3 units

V8 Software: V8.3.15
FlashScan/AutoCal V3: Firmware: V3.00.084 (Dec 16, 2021)
FlashScan/AutoCal V3: Boot Block: V3.00.005 (Oct 20, 2020)
FlashScan/AutoCal V2: Firmware: V2.08.184 (Dec 16, 2021)
FlashScan/AutoCal V2: Boot Block: V2.07.009 (Feb 27, 2021)
V7.5 Software: V7.5.43

All drivers are up to date as well.

When I first started using the V3 cable with my transferred licenses from my V2 I had no issues reading or flashing ecm's. Now in order to Flash a LS1A/LS1B/E38/E40/E76/E92/T42/T43 i need to disable the High Speed mode and also enable the "Assume lock maybe faulty function". This is the only way I can read/flash now, no changes otherwise on my laptop and its used only for tuning.

Its the same process now using my V2 or V3 cables, and its very annoying. Most of the time now I can't auto search for the controller and I have to manually select. Is there a windows update that's come through possibly causing this? Its frustrating taking 8-10 minutes to pull a vehicle stock file out and then tune it from there. A Cal-flash takes twice as long as it use to as well.