Results 1 to 3 of 3

Thread: Ls1b $0281 $0101 $054a

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Junior Member
    Join Date
    Oct 2021
    Posts
    13

    Default Ls1b $0281 $0101 $054a

    Trying to Cal flash a LS1B ECM and keep getting $0281 $0101 $054A Believe I possibly bricked one because of $0281 during a call flash. Was able to flash another and get engine running but tried to get back in and change trans to 4l60 and getting the same codes not all at once but different times.
    Had stereo on star and ABS fuses pulled, no other power draws, OBDII fuse is good.

    V8.3.21
    V3 Firmware V3.00.
    Bootblock V3.00.006
    Any help….
    Last edited by ccclose; April 17th, 2022 at 12:50 PM.

  2. #2
    Junior Member
    Join Date
    Oct 2021
    Posts
    13

    Default

    Heres a trace
    Attached Files Attached Files

  3. #3
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,490

    Default

    The LS1 controller appears to be unresponsive and most likely unrecoverable due to the full flash failure.
    Contact SoCal Diesel, they can replace the flash chip on the LS1 controllers.
    https://www.efilive.com/distributors

    Regards
    Paul
    Before asking for help, please read this.

Similar Threads

  1. Code $0101
    By tytilidie in forum General
    Replies: 0
    Last Post: June 24th, 2021, 09:10 AM
  2. $0101 During Crank
    By RC1 in forum General
    Replies: 13
    Last Post: October 21st, 2019, 03:41 AM
  3. $054A Boot Loader Failed to Start
    By brentg454 in forum General (Petrol, Gas, Ethanol)
    Replies: 2
    Last Post: May 10th, 2018, 10:49 AM
  4. Error 0101 code
    By Jaredlpickett1991 in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 0
    Last Post: December 14th, 2015, 06:24 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •