Results 1 to 3 of 3

Thread: May 09, 2022, V8.3.24 Public Pre-Release

  1. #1
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,490

    Default May 09, 2022, V8.3.24 Public Pre-Release

    V8.3.24 Public Pre-Release

    Full Release Notes:
    Version Numbers:
    After installing this release you should have the following software and firmware versions installed:


    • EFILive V8 software: V8.3.24
    • FlashScan/AutoCal V3
      • Firmware: V3.00.092
      • Boot Block: V3.00.006



    Download here:

    Known Issues:
    Issue #1: When logging DMA PIDs (i.e., PIDs whose names end with "_M" or "_DMA"), if the ignition is switched off for an extended period while data logging but data logging is not terminated, then when the ignition is switched on again the data log automatically continues. However, the DMA PIDs may no longer return valid data.
    Workaround: EFILive recommends stopping the data log and restarting the data log when switching off the ignition for extended periods.

    Regards,
    The EFILive Team
    Last edited by Blacky; June 21st, 2022 at 02:27 PM.
    Before asking for help, please read this.

  2. #2
    Lifetime Member
    Join Date
    Jul 2003
    Posts
    1,897

    Default

    I will test this release but,

    Fixed VIN change option on the CM2450B (CMF) controller - which was failing with error $0101 "No data received." if the "Clear DTCs before changing VIN" checkbox was checked (even when it was disabled)".

    this was also happening on e38s. it also happens on oil life change.
    "All that is needed for the triumph of evil is that good men do nothing..."

  3. #3
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,490

    Default

    The fix for the CMF was to simply not send the clear DTC command prior to changing the VIN - it caused problems on the Cummins platform.
    Is it possible that when you are updating the E38 you also need to check the "Obtain secure access" option as well?

    Quote Originally Posted by Highlander View Post
    I will test this release but,

    Fixed VIN change option on the CM2450B (CMF) controller - which was failing with error $0101 "No data received." if the "Clear DTCs before changing VIN" checkbox was checked (even when it was disabled)".

    this was also happening on e38s. it also happens on oil life change.
    Before asking for help, please read this.

Similar Threads

  1. May 05, 2022, V8.3.23 Public Pre-Release
    By Blacky in forum Software Updates and Installation Help
    Replies: 0
    Last Post: May 4th, 2022, 10:52 AM
  2. April 2022, V8.3.20 Public Release
    By Blacky in forum Software Updates and Installation Help
    Replies: 3
    Last Post: April 6th, 2022, 07:35 AM
  3. March 2022, V8.3.19 Public Release
    By Blacky in forum Software Updates and Installation Help
    Replies: 0
    Last Post: March 3rd, 2022, 05:08 PM
  4. January 2022, V8.3.18 Public Release
    By Blacky in forum Software Updates and Installation Help
    Replies: 2
    Last Post: February 24th, 2022, 09:51 AM
  5. January 2022, V8.3.17 Public Release
    By Blacky in forum Software Updates and Installation Help
    Replies: 0
    Last Post: February 1st, 2022, 01:31 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •