Results 1 to 3 of 3

Thread: Throttle position issue

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Member
    Join Date
    Aug 2016
    Posts
    90

    Default Throttle position issue

    Good day,

    I'm having an issue with an E92 swap and a lack of throttle movement. This is a '14 Silverado V6, using the original ECM and the Silverado pedal. I've logged what I believe to be all of the important throttle PIDS, and I see that my ETCPP1 and ETCPP2 positions are reading 100% at full throttle, but the TPDES never goes higher than 40%. I've tried this test with the car running and with it shut off, and I get the same result. I also had a look at any throttle limiting stuff I could think of, but found nothing. Does anyone have any other thoughts on where to look next?
    I've attached both logs, running and not running.
    Attached Files Attached Files

Similar Threads

  1. Throttle Position (TP%)?
    By beav in forum Diesel
    Replies: 2
    Last Post: July 1st, 2013, 11:32 PM
  2. Throttle Position readings
    By Strong05 in forum IL6,IL5,IL4 Atlas Engines - P12 PCM
    Replies: 2
    Last Post: April 7th, 2013, 02:19 PM
  3. Throttle Position
    By bstuder11 in forum Gen IV V8 Specific
    Replies: 6
    Last Post: April 7th, 2012, 11:12 PM
  4. Throttle position Pid
    By zbadestz in forum General
    Replies: 10
    Last Post: February 26th, 2012, 12:52 AM
  5. Throttle position confuddlement
    By turboberserker in forum General (Petrol, Gas, Ethanol)
    Replies: 10
    Last Post: June 2nd, 2010, 06:18 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •