Results 1 to 2 of 2

Thread: V8 Scan - flags during PC and BBX logging

  1. #1
    Junior Member
    Join Date
    May 2015
    Posts
    26

    Default V8 Scan - flags during PC and BBX logging

    In the V7.5 software and with the V2 cable you could use the space bar during a PC log or the F1/F2/F3/F4 keys during BBX logging to put flags in the data logs. Is something similar possible in the V8 software with a PC and in the V2 interface when BBX logging? I couldn't find any information about this in the manuals (but I may have missed it).

    Thanks,


    Jason

  2. #2
    Lifetime Member
    Join Date
    Jul 2003
    Posts
    1,897

    Default

    you can use the space twice for a quick mark and on v3 a quick double checkmark should do the same. I find the v2 solution to be neater, but still works and serves the same purpose.
    "All that is needed for the triumph of evil is that good men do nothing..."

Similar Threads

  1. F5 BBX Will not open in EFI Live Scan and Tune
    By DailyDrivenLyle in forum FlashScan V2
    Replies: 1
    Last Post: March 15th, 2020, 01:51 PM
  2. Marking logs during BBX Logging?
    By Mitco39 in forum General
    Replies: 2
    Last Post: September 18th, 2018, 06:09 AM
  3. Pids not showing up in scan for the diesel motors in the bbx
    By Scarface in forum FlashScan V2 BB Logging
    Replies: 4
    Last Post: April 9th, 2014, 02:48 AM
  4. Cant Scan or BBX
    By louisvanwilker in forum Diesel
    Replies: 1
    Last Post: November 29th, 2013, 03:24 PM
  5. Monitor names and DTC status flags
    By joecar in forum FlashScan V2 BB Logging
    Replies: 0
    Last Post: May 29th, 2008, 10:47 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •