Recently started tuning my emissions equipped 16 LML. I have been experiencing a reduced power with no codes for a split second after accelerating from a stop. Truck loses all power, check engine light flashes, and I then lay off the throttle. As soon as I get back on the throttle, power is there and the truck can drive off. This is the first time ive been able to log it. It looks like the NOX sensors zeroed out and never returned till I was a quarter mile down the road. Have you guys seen this before? Am I blocking these sensors with soot? I assume since they were reading 0 for so long thats why my soot accumulated so quickly. Attached is a log from when it happened. Thank you for the help!