Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: August 05 2022, V8.3.28 Public Release

  1. #1
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,406

    Default August 05 2022, V8.3.28 Public Release

    V8.3.28 Public Release

    Full Release Notes:
    Version Numbers:
    After installing this release you should have the following software and firmware versions installed:


    • EFILive V8 software: V8.3.28
    • FlashScan/AutoCal V3
      • Firmware: V3.00.096
      • Boot Block: V3.00.006



    Download here:

    Known Issues:
    Issue #1: When logging DMA PIDs (i.e., PIDs whose names end with "_M" or "_DMA"), if the ignition is switched off for an extended period while data logging but data logging is not terminated, then when the ignition is switched on again the data log automatically continues. However, the DMA PIDs may no longer return valid data.
    Workaround: EFILive recommends stopping the data log and restarting the data log when switching off the ignition for extended periods.

    Issue #2: The "What's New" document shows the EFILive V8 software version as V8.2.28 instead of V8.3.28.
    Workaround: Just assume it says V8.3.28 .


    Regards,
    The EFILive Team
    Last edited by Blacky; 6 Days Ago at 09:50 AM.
    Before asking for help, please read this.

  2. #2
    Junior Member
    Join Date
    Feb 2011
    Posts
    27

    Default

    E67 MAFLess Traction patch has been removed

  3. #3
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,406

    Default

    Quote Originally Posted by Millsy View Post
    E67 MAFLess Traction patch has been removed
    Which operating system number?
    Regards
    Paul
    Before asking for help, please read this.

  4. #4
    Junior Member
    Join Date
    Feb 2011
    Posts
    27

    Default

    Hi Paul,

    12656942

    Regards,

    Millsy

  5. #5
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,406

    Default

    Hi Millsy,

    Not removed, it was never implemented for that OS (it was never in V7.5 either).
    I'll find out if it is possible to add the patch for that OS.

    Regards
    Paul
    Before asking for help, please read this.

  6. #6
    Junior Member
    Join Date
    Feb 2011
    Posts
    27

    Default

    Thanks Paul,

    Very strange.

    I tuned another VF GTS with the same OS only a month ago and the patches were there and applied.

    I only updated last week and now it seems they are gone.

    Let me know asap.

    Regards,

    Millsy
    Last edited by Millsy; 1 Week Ago at 05:03 PM.

  7. #7
    Lifetime Member
    Join Date
    Jul 2003
    Posts
    1,857

    Default

    Why was the save dash removed?????????
    "All that is needed for the triumph of evil is that good men do nothing..."

  8. #8
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,406

    Default

    Quote Originally Posted by Highlander View Post
    Why was the save dash removed?????????
    Not removed, just moved to be a drop-down option under the [Save] button.
    Regards
    Paul
    Before asking for help, please read this.

  9. #9
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,406

    Default

    Quote Originally Posted by Millsy View Post
    Thanks Paul,

    Very strange.

    I tuned another VF GTS with the same OS only a month ago and the patches were there and applied.

    I only updated last week and now it seems they are gone.

    Let me know asap.

    Regards,

    Millsy
    We have not removed any of the patches. It's just that some OSes do not have the patch implemented. The 2 VF GTS controllers must have had different OSes, one with the patch and one without.
    Anyway, we have found that the patch is not needed on the later model ECMs. It was really only the VE that needed the patch.

    The patch is not required and you can run them in in speed density mode without needing to patch them, it was only really the VE commodores that required patching as the traction light would come on and trans go firm, VF does not do this even with E38 controller and can be run in speed density without needing to be patched.

    Regards
    Paul
    Before asking for help, please read this.

  10. #10
    Junior Member
    Join Date
    Feb 2011
    Posts
    27

    Default

    Thanks Paul,

    After looking through some old VF E38 and VF E67 tunes, it appears I have still applied the patch to mafless VF E38 tunes.

    As you kindly pointed out, the patch does not appear in E67 tunes. I will investigate further as to why car no.2 has the traction light on and car no.1 did not.

    Regards,

    Millsy

Page 1 of 2 12 LastLast

Similar Threads

  1. April 2022, V8.3.20 Public Release
    By Blacky in forum Software Updates and Installation Help
    Replies: 3
    Last Post: April 6th, 2022, 08:35 AM
  2. March 2022, V8.3.19 Public Release
    By Blacky in forum Software Updates and Installation Help
    Replies: 0
    Last Post: March 3rd, 2022, 06:08 PM
  3. January 2022, V8.3.18 Public Release
    By Blacky in forum Software Updates and Installation Help
    Replies: 2
    Last Post: February 24th, 2022, 10:51 AM
  4. January 2022, V8.3.17 Public Release
    By Blacky in forum Software Updates and Installation Help
    Replies: 0
    Last Post: February 1st, 2022, 02:31 PM
  5. Official Public Release - August 16,2010
    By Blacky in forum Software Updates and Installation Help
    Replies: 32
    Last Post: October 8th, 2010, 05:57 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •