Results 1 to 2 of 2

Thread: Expansion Port

  1. #1
    Lifetime Member Tre-Cool's Avatar
    Join Date
    Feb 2006
    Posts
    885

    Default Expansion Port

    So the website has "Connects third party data loggers to FlashScan V3 and AutoCal V3 via CAN. Currently no third party CAN data loggers are supported. This feature is reserved for future expansion."

    I was thinking that with the loss of analog input, that it might be worth building an arduino to take analog signals then send out can data to the logger. Is this the kind of thing that would be possible with this port or was it primarily for sending data out of the unit?

    I figure i could either send the data via rs232 or CAN, depending on which bus was the fastest to receive.

  2. #2
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,306

    Default

    That's what I would figure to do.

    From my previous job at a car maker I remember the Arduino library supports CAN bus messages.

Similar Threads

  1. USB port
    By derkscustomcars in forum FlashScan V3
    Replies: 1
    Last Post: April 25th, 2021, 01:44 PM
  2. FSV2 to LC-1 via serial port.
    By Hib Halverson in forum FlashScan V2
    Replies: 27
    Last Post: August 18th, 2015, 03:01 PM
  3. New LM2 without serial port?
    By Protec in forum External A/D inputs
    Replies: 20
    Last Post: September 7th, 2012, 12:45 PM
  4. Calibrating AD port
    By stigmundfreud in forum Black Box Logging
    Replies: 5
    Last Post: March 30th, 2008, 11:21 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •