Results 1 to 5 of 5

Thread: AEM uego randomly shows max lean

  1. #1
    Lifetime Member
    Join Date
    Jan 2012
    Posts
    248

    Default AEM uego randomly shows max lean

    trying to tune my cammed 2011 Escalade. Have a AEM Uego wideband. Never notice anything unusual. but when I look at my logs there are a few places where it goes to 655 and its causing my ben maps to be incorrect. I used a 6 wire phone cord with the rj45 end. I cut one end off and wired the AEM serial wire to it and connected it to the v2. Could it be a wiring issue? or somting else?
    2011 Cadillac Escalade ESV. BTR 218/224 .553/.553 110LSA. Built 6L80 with 278mm Circle D 2800 stall converter.

  2. #2
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,466

    Default

    Can you log this as a support ticket here: https://service.efilive.com/new-ticket
    Be sure to include all details about your EFILive device, windows and include the appropriate trace files and log files showing the issue.
    Regards
    Paul
    Before asking for help, please read this.

  3. #3
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,374

    Default

    Please post log file here, I'd like to see the event.

  4. #4
    Lifetime Member
    Join Date
    Jan 2012
    Posts
    248

    Default

    It happened a few times in this log
    Attached Files Attached Files
    2011 Cadillac Escalade ESV. BTR 218/224 .553/.553 110LSA. Built 6L80 with 278mm Circle D 2800 stall converter.

  5. #5
    Lifetime Member
    Join Date
    Jul 2003
    Posts
    1,887

    Default

    filter it. just bad data.
    "All that is needed for the triumph of evil is that good men do nothing..."

Similar Threads

  1. Auto VE using AEM UEGO
    By blindawg in forum Gen III V8 Specific
    Replies: 3
    Last Post: February 18th, 2016, 11:56 AM
  2. conecting a 30-2310 AEM UEGO to V2 HELP PLEASE
    By restless@westnet.com.au in forum FlashScan V2
    Replies: 10
    Last Post: May 31st, 2013, 08:17 PM
  3. V1, randomly cannot log AFR w/ AEM Uego
    By Tan327 in forum General
    Replies: 8
    Last Post: February 24th, 2012, 02:40 PM
  4. AEM UEGO to EFILive v1?
    By Tan327 in forum General
    Replies: 4
    Last Post: July 25th, 2011, 11:26 AM
  5. AutoVE with AEM UEGO
    By nevinsb in forum Vortec V6/V8 Specific
    Replies: 5
    Last Post: June 13th, 2009, 04:57 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •