Results 1 to 3 of 3

Thread: v1 walkthrough

  1. #1
    New Member
    Join Date
    Jan 2023
    Posts
    1

    Default v1 walkthrough

    Hi guys first time poster here, first time efi tuner here and first timer for a lot of other things.

    Recently bought myself a VT Holden Ls1 that came with flashscanv1 commercial.

    Ive read the user manuals a few times but hoping someone can hold my hand and walk me through a reflash.

    Or link me to a thread or site

    Car runs great and has been on a dyno by previous owner. My plan is to later add Nitrous with a standalone hi octane fuel system.(E85, methanol or race gas)

    Also have a few motors 396bb & 454 chev and Pontiac 400 that I would like to adapt to run Ls1 or similar PCM

    I think i have downloaded my tune correctly.. If I upload it can someone squizz through it quickly?

    Brief history of me.. Im a qualified Automotive Machinist, have been self employed for the last 3 years of my career of 20years now

    Check out my website

    < url deleted by mod >


    cheers
    Attached Files Attached Files
    Last edited by joecar; January 15th, 2023 at 08:09 PM.

  2. #2
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,407

    Default

    Hi Warren,

    Welcome to the forum.

    While you can mention the name of your shop, you can't post a url to it.

  3. #3
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,407

    Default

    First get familiar with logging.

    FlashScan V1 will not allow you to read/write the PCM's flash. You would need FSV2 or FSV3.

Similar Threads

  1. CSP-5 Video walkthrough
    By 2007 5.9 in forum Cummins 5.9L
    Replies: 12
    Last Post: July 30th, 2013, 07:17 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •