Results 1 to 3 of 3

Thread: E38 no misfire data

  1. #1
    Junior Member
    Join Date
    Apr 2021
    Posts
    12

    Default E38 no misfire data

    Heres the story.....
    I swapped a LC9 into my 07 Avalanche , added a 70mm turbo in April of 2021. I had some lean tip in problems that would come and go. Ditched the MAF and tuned it for SD, voila no more issues. Its got almost 60k miles on it without any major issues.

    Recently it developed a misfire anywhere above 8 PSI (boost controller is set to 10.5). I noticed that logging any misfire data came up with nothing, multiple scan tools same issue.

    I'm not seeing anything in the tune that would give me this issue. Is this just a product of running SD on an E38?
    Could someone give the tune a once over and see if I'm missing somerhting?
    Attached Files Attached Files

  2. #2
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    I haven't looked in your ctz, but the MAF DTC may be preventing the misfire detection.

  3. #3
    Junior Member
    Join Date
    Apr 2021
    Posts
    12

    Default

    Quote Originally Posted by joecar View Post
    I haven't looked in your ctz, but the MAF DTC may be preventing the misfire detection.

    Thank s Joe, let me know when you get a chance to look

    I'm thinking it may not register misfires in SD because it's looking at airflow differences for misfires data. No MAF, no airflow data? I don't know, maybe?

Similar Threads

  1. E38 checksum $06FF now no data
    By 07 LBZ in forum Petrol / Gas
    Replies: 1
    Last Post: February 20th, 2018, 08:41 AM
  2. Question About Logging Misfire Data
    By swingtan in forum General
    Replies: 6
    Last Post: June 9th, 2014, 01:38 AM
  3. Request for E38 log data
    By Gelf VXR in forum E37, E38 & E67 PFI ECM's
    Replies: 2
    Last Post: July 16th, 2013, 04:50 PM
  4. E38 injector data
    By DYNOBOB in forum Gen IV V8 Specific
    Replies: 1
    Last Post: December 18th, 2012, 10:00 AM
  5. E38 Misfire DTC
    By macca_779 in forum Gen IV V8 Specific
    Replies: 1
    Last Post: October 19th, 2007, 10:18 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •