Results 1 to 4 of 4

Thread: Knock at low load

  1. #1
    Junior Member
    Join Date
    May 2023
    Posts
    10

    Default Knock at low load

    Hi !

    I preparing to do the CALC.VET tuning but I get knock/retard at low load but i don`t know why. False or is it something strange in my settings?
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	Knock low load.JPG 
Views:	66 
Size:	326.4 KB 
ID:	24431  
    Attached Files Attached Files
    Last edited by Saltsjoqvarn; May 27th, 2023 at 05:15 AM.

  2. #2
    Senior Member
    Join Date
    Nov 2014
    Posts
    192

    Default

    always good to check burst knock. i doubt it would set in at 12% tp though. where is your spark and vss? i cant read the labels.

    (you seem to have the same problem iv had with the logging software for many years now, the layout close to impossible to manage.)
    Last edited by dian; November 16th, 2023 at 08:06 PM.

  3. #3
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Can you hear it?

  4. #4
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    ( yes, takes alot of effort to manage )

Similar Threads

  1. 4l80e swap, converter making noise at low load? Line pressure?
    By jay_rich in forum Gen III V8 Specific
    Replies: 0
    Last Post: June 22nd, 2015, 03:58 AM
  2. Is 45* too high for low load low rpm cruising?
    By the Dragon in forum General
    Replies: 12
    Last Post: February 13th, 2011, 12:43 PM
  3. What caused this low rpm knock ?
    By wesam in forum Gen III V8 Specific
    Replies: 50
    Last Post: July 15th, 2010, 11:13 AM
  4. Excess Timing in low load areas causes surge/buck issues, and how I fixed it.
    By ArKay99 in forum General (Petrol, Gas, Ethanol)
    Replies: 14
    Last Post: August 5th, 2008, 11:08 AM
  5. Negative Timing in High Load and Low RPM areas?????
    By BlackGMC in forum Gen III V8 Specific
    Replies: 1
    Last Post: February 18th, 2008, 01:55 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •