Results 1 to 8 of 8

Thread: Apr 16, 2023, V8.3.38 Public Release (Update 1 for V8.2.37)

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,490

    Default Apr 16, 2023, V8.3.38 Public Release (Update 1 for V8.2.37)

    V8.3.38 Public Release (Update 1 for V8.2.37)


    Full Release Notes:
    Version Numbers:
    After installing this release you should have the following software and firmware versions installed:

    • EFILive V8 software: V8.3.38
    • FlashScan/AutoCal V3 Firmware: V3.00.106


    Download here:
    Known Limitations:
    Limitation #1: When logging DMA PIDs (i.e., PIDs whose names end with "_M" or "_DMA"), if the ignition is switched off for an extended period while data logging but data logging is not terminated, then when the ignition is switched on again the data log automatically continues. However, the DMA PIDs may no longer return valid data.
    Workaround: EFILive recommends stopping the data log and restarting the data log when switching off the ignition for extended periods.

    Limitation #2: When opening CMF (CM2450B) Cummins 2022 tune files, the EFILive software will complain with the following message:
    Click image for larger version. 

Name:	NotConfigured.png 
Views:	196 
Size:	5.9 KB 
ID:	24399
    That is expected and the message may be ignored. We have only added the option to open CMF 2022 stock files so that EFILive can flash stock files. EFILive cannot be used to update the check sums of modified files. Modified files cannot be flashed.
    Ignore the message if you are opening and flashing a 100% stock tune file. Do not attempt to flash a modified file, it will fail at the end of the flash and the vehicle will be left in a no-start condition until a stock file is flashed in.
    Workaround: None.

    Limitation #3: When logging DMA PIDs (i.e., PIDs whose names end with "_M" or "_DMA"), that are specific to a custom operating system such as DSP2 or DSP5 PIDs when running a stock operating system, the values returned by those DMA PIDs will not contain valid information and should be ignored.

    Known Issues:
    Issue #1: When flashing CME/CMF (CM2350B/CM2450B) Cummins controllers with AutoCal/FlashScan V3 devices the flash can sometimes fail with error $0322.
    Workaround: Download and install firmware update V3.00.107 attached to this thread.

    Issue #2: *.cax8 files containing blank lines that contain one or more space characters will fail to load with the error "Index out of range".
    Workaround: Remove the spaces from blank lines, or remove the blank lines.

    Regards,
    The EFILive Team
    Attached Files Attached Files
    Last edited by Blacky; June 16th, 2023 at 02:09 PM.
    Before asking for help, please read this.

Similar Threads

  1. Apr 05, 2023, V8.3.37 Public Release
    By Blacky in forum Software Updates and Installation Help
    Replies: 0
    Last Post: April 4th, 2023, 01:27 PM
  2. Mar 23, 2023, V8.3.36 Public Release Candidate 3
    By Blacky in forum Software Updates and Installation Help
    Replies: 0
    Last Post: March 22nd, 2023, 01:11 PM
  3. Feb 22, 2023, V8.3.35 Public Release Candidate 2
    By Blacky in forum Software Updates and Installation Help
    Replies: 0
    Last Post: February 21st, 2023, 11:43 AM
  4. Feb 05, 2023, V8.3.34 Public Release Canditate
    By Blacky in forum Software Updates and Installation Help
    Replies: 0
    Last Post: February 4th, 2023, 03:43 PM
  5. Public Release: Apr 23, 2013
    By Blacky in forum Software Updates and Installation Help
    Replies: 77
    Last Post: May 14th, 2013, 02:49 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •