Results 1 to 2 of 2

Thread: CCM controller, specifically C7 corvette

  1. #1
    Senior Member
    Join Date
    Apr 2010
    Posts
    167

    Default CCM controller, specifically C7 corvette

    its been mentioned in only 2 whole posts that I can find when searching the forum.

    The other guys can access and license the CCM (via the OBDII) and tune , e.g. the NPP (performance exhaust flaps) open and close points - among many other things.

    I know EFIlive noted a large diesel/cummings push over the last years, but i found it the best for my Ls1 camaro with custom OS etc. However moving up in cars to a C7, I have less to work with. Now being told (and seeing) the others tune the exhaust mode flaps is a bit annoying I have all this tech and cannot do this.... or can we?
    I've not updated my EFI live for a good year

  2. #2
    Lifetime Member
    Join Date
    Mar 2006
    Posts
    572

    Default

    I know it's not fun but I have to use HPT to scan certain channels for certain Operating systems and use it to change parameters in the tune then read it off with EFI and finish tuning.

Similar Threads

  1. Replies: 0
    Last Post: October 14th, 2022, 02:17 AM
  2. Vortec PCM/Controller not listed under DVT controller selection.
    By Scatfish in forum Vortec V6/V8 Specific
    Replies: 5
    Last Post: April 5th, 2015, 12:10 PM
  3. 2010 A6 Corvette Transmission in 2007 Corvette Model
    By epic in forum E37, E38 & E67 PFI ECM's
    Replies: 2
    Last Post: April 24th, 2013, 01:23 PM
  4. Will E38 from 08 Corvette work in 2007 Corvette?
    By Chalky in forum Gen IV V8 Specific
    Replies: 2
    Last Post: June 5th, 2010, 10:00 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •