Tip/trick For The "big" Injector Guys!

[nitrorocket]

Did you know..... The small pulse adjust table is key to lowering the AFR a given amount by adding 0 or more to the pulse width???? Well, did you know you can also subtract any amount by adding a - sign and the number you want to take away from the pulse width?? Thought this trick might save somebody from pulling there hair out. I have been doing this succesfully for a while now, works perfect with my MONSTER 96 LB injectors!

[Tordne]

Very interesting idea!!! My min pulse width seems to be around the 1.7ms mark which is too high for low map cells. Might just give this a go