Just did some logging and trying to playback the results with the chart. I can see the PID results playback (in the data screen) but cannot get the charts to work. Any ideas? Thanks.
Chris
Just did some logging and trying to playback the results with the chart. I can see the PID results playback (in the data screen) but cannot get the charts to work. Any ideas? Thanks.
Chris
Last edited by foxySS; September 6th, 2006 at 12:14 PM.
Nevermind, figured it out.
Can you see the charts when you hit F10 and then 'B'? As long as you're viewing a chart that displays a selected PID for that log, it should work during playback. If the PID listed on the chart has a line through it, it wasn't logged. You might have to Right Click on the left or right side and use a selected PID under the Metric, Imperial, or Other PID sections.
On the Dashboard (F10) tab, select B.
Then right click somewhere in middle of window, and go
Add->Chart->New Chart or
Add->Chart->Theme: Default->Imperial1
A chart should appear, you can resize/move it if you want (grab with mouse);
repeat 4 more times;
then do right click in middle of window and go Dash Settings->Tile Charts.
Then right click on any corner of the chart,
you will see Metric, Imperial, Other, choose one,
you will see a list of PIDs,
choose the PID you want;
repeat on other corners of chart for more PIDs;
Now go either
File->Save->Save Dashpage or
File->Save As->Save Dashpage As
Edit: oh, I'm too late... :lol:
Last edited by joecar; September 7th, 2006 at 05:26 AM.