Results 1 to 4 of 4

Thread: Lean spike

  1. #1
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default Lean spike

    What is this lean spike all about (a little to the left of the cursor)...


  2. #2
    Lifetime Member TAQuickness's Avatar
    Join Date
    Jan 2005
    Posts
    2,940

    Default

    you know Joe - I was going to ask you the same thing. What kind of wide band are you running again?

    I have LC1's and notice the same thing in my logs. Seems my right bank is more prone to the spike.


  3. #3
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    TA,

    I'm running an LC-1 in the right bank...

    I'll install it on the left bank and see, or I should buy a second LC-1.


  4. #4
    Lifetime Member TAQuickness's Avatar
    Join Date
    Jan 2005
    Posts
    2,940

    Default

    I would vote for the dual LC1 so you can verify the activity on both banks.

    Until your post, I had written off that spike as part of my electical noise (I need to send you those logs someday). Still, it's odd the left bank doesn't spike as frequently.


Similar Threads

  1. Huge spike in AutoVE LS2
    By Gelf VXR in forum Gen IV V8 Specific
    Replies: 5
    Last Post: March 1st, 2008, 05:40 AM
  2. huge spike in ve table!!
    By ssmike300 in forum General (Petrol, Gas, Ethanol)
    Replies: 3
    Last Post: February 27th, 2008, 02:18 PM
  3. WOT bog from a stop. Lean Spike. Ideas?
    By tunedportcj5 in forum Gen III V8 Specific
    Replies: 11
    Last Post: December 1st, 2007, 04:46 PM
  4. Decel lean spike/IFR table limit ?
    By DrX in forum General (Petrol, Gas, Ethanol)
    Replies: 2
    Last Post: March 4th, 2007, 05:14 PM
  5. Injector Duty Cycle spike ??
    By oztracktuning in forum General (Petrol, Gas, Ethanol)
    Replies: 20
    Last Post: February 21st, 2006, 10:51 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •