Results 1 to 5 of 5

Thread: Applying KR logs to Spark Maps

  1. #1
    Junior Member
    Join Date
    May 2006
    Posts
    22

    Default Applying KR logs to Spark Maps

    I have ran a few logs and I know you can copy and paste AFR histogram values into the VE table but I also need to tune out my KR and am having trouble. What is the best way to apply data from the histogram table for KR and apply it to the high and low spark octane tables?

  2. #2
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Create the following map (press a map tab letter A..J, press the "Edit map properties" button):
    data = GM.KR
    col = GM.DYNCYLAIR_DMA
    row = SAE.RPM
    optional: place a checkmark in the "Display Type" box;

    goto your Low Octane Spark table:
    click the upper left (whole table becomes selected),
    right click,
    copy with labels;

    go back to your KR map:
    on the Columns tab, press Paste Labels;
    on the Rows tab, press Paste Labels;
    press Save As and give it a name "KR=RPMxDYNCYLAIR";
    press OK.

  3. #3
    Lifetime Member SSpdDmon's Avatar
    Join Date
    Jun 2005
    Posts
    1,558

    Default

    You don't want to take out the full amount of timing pulled though. The knock sensors tend to overcompensate. Where are you seeing timing being pulled and how much are you commanding?

  4. #4

    Default

    I always start my tune with less timing and work up to knock as opposed to throwing in a table and getting knock in various spots. Especially on a boosted motors. I wouldn't cut and paste the mapped values as SS stated it will be more timing taken out then is needed to stop the knock and power will be down.

    HT

    www.redline-motorsports.net

    1-954-703-5560

    2006 ZO6 895/866 with APS TT
    2010 SSRS Camaro HTR-900TT (798/801)
    2011 HTR-850R Camaro
    2012 ZL1 Auto (10.33@135 MPH) Video Here!

  5. #5
    Junior Member
    Join Date
    May 2006
    Posts
    22

    Default

    Thanks for the help. I just had a little bit of knock and it is gone now so I am a happy guy

Similar Threads

  1. Dual Spark Maps - Difference ?
    By Happy Jim in forum Custom Operating Systems
    Replies: 3
    Last Post: December 30th, 2006, 11:08 AM
  2. Who logs IAT maps??
    By nitrorocket in forum General (Petrol, Gas, Ethanol)
    Replies: 4
    Last Post: September 20th, 2006, 04:39 AM
  3. Dual spark maps SD mode
    By APE346 in forum General (Petrol, Gas, Ethanol)
    Replies: 2
    Last Post: June 10th, 2005, 12:11 AM
  4. Twin Spark Maps?
    By BlownAlaskan in forum General (Petrol, Gas, Ethanol)
    Replies: 2
    Last Post: May 18th, 2005, 07:18 AM
  5. V5 spark and fuel maps into V6?
    By emarkay in forum EFILive V6
    Replies: 12
    Last Post: May 24th, 2004, 07:58 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •