My unit does respond to the normal flash routines ONLY when in flash mode.. my unit appears to have flash unit because i was able to flash it via efilive using my flashscan v1 cable...
I am unable to flash with v1 when emulation is enabled and i can surely understand it.. no worries there AND i am not interested either.
I was able to have 2 different OS installed... and when connected to the scan tool you could switch between them. So i know i have flash enabled.. Now.. I can't flash the flash portion, the car won't start with either the flash or emulation or realtime. It will display many code P1518 C1276 are the ones that always repeated.
My serial number of my RR is 0106030313173135
What i need to know is... is there a way to hard reset it? my guessing is that since i played while runing with switching between flash and emu, the PCM locked itself out because of the ETC functionnig.
What I will do is open it up and then take a picture and see if i have a flash or not... That would take us all out of the doubt.