Page 1 of 2 12 LastLast
Results 1 to 10 of 16

Thread: Anyone try the FAST dual wideband setup?.................

  1. #1
    Senior Member
    Join Date
    May 2006
    Posts
    179

    Default Anyone try the FAST dual wideband setup?.................

    I was thinking about getting one of these and was wondering if anyone could give me some info/review as to how they like/dislike it.

    Thanks

  2. #2
    Lifetime Member TAQuickness's Avatar
    Join Date
    Jan 2005
    Posts
    2,940

    Default

    haven't used a fast wb, but I am running a dual lc1 config. <gump> I like it alot


  3. #3
    Junior Member
    Join Date
    Jun 2006
    Posts
    37

    Default

    I don't think there are preprogrammed pids or this setup....? I guess cause it's too new. Anyone else tried this setup? It looks pretty cool: http://www.fuelairspark.com/Products...rFuelMeter.asp

  4. #4
    Member VT LS1 NZ's Avatar
    Join Date
    Apr 2003
    Posts
    79

    Default

    Ive been using the Fast for a while now.The only thing I dislike is having to go thru a couple of key strokes to get the analogue output working each time.
    Most other widebands I've used start up once power is supplied.
    Thou you do have the advantage if lap top not connected a small screen to look/monitor AFR whether individually or an average of both.

    Here's the pid set up I'm using:


    # ================================================== ============================
    # Add slot definitions here
    # --------------------------------
    # See sae_generic.txt for more information on "SLOT" formats
    #
    #Units Low High Fmt Expression
    #------------ ------------- ------------- ---- --------------------------------------------------------------

    *CLC-00-991
    "AFR" 10.0 20.0 .2 "({CALC.AFR_FAST1.AFR}+{CALC.AFR_FAST2.AFR})/2"
    *CLC-00-990
    factor 0.0 2.0 .1 "{CALC.Fast_AFR_AVG_B1&B2}/{GM.AFR}"

    # Fast WBO2
    # ========================
    *CLC-00-985
    V 0.0 5.0 .1 "{EXT.AD1}"
    AFR 10.0 20.0 .1 "{EXT.AD1}*2.78+9.6"
    *CLC-00-984
    factor 0.0 2.0 .1 "{CALC.AFR_FAST1.AFR}/{GM.AFR}"
    *CLC-00-983
    V 0.0 5.0 .1 "{EXT.AD2}"
    AFR 10.0 20.0 .1 "{EXT.AD2}*2.78+9.6"
    *CLC-00-982
    factor 0.0 2.0 .1 "{CALC.AFR_FAST2.AFR}/{GM.AFR}"
    # ================================================== ============================
    *PRN - Parameter Reference Numbers
    # --------------------------------
    # See sae_generic.txt for more information on the *PRN section
    #
    #Code PRN SLOT Units System Description
    #------------------------- ---- ------------ ---------------- ---------------- ------------------------------------------
    CALC.Fast_AFR_AVG_B1&B2 F602 CLC-00-991 "AFR,V" O2-Wide "Average Fast1 & Fast2"
    CALC.BEN_AVG_FASTB1&B2 F603 CLC-00-990 factor O2-Wide "Base Efficiency Numerator(AVG) - Fast"

    CALC.AFR_FAST1 F618 CLC-00-985 "AFR,V" O2-Wide "Wide Band AFR 1 - Fast"
    CALC.BEN_FAST1 F619 CLC-00-984 factor O2-Wide "Base Efficiency Numerator 1 - Fast"
    CALC.AFR_FAST2 F61A CLC-00-983 "AFR,V" O2-Wide "Wide Band AFR 2 - Fast"
    CALC.BEN_FAST2 F61B CLC-00-982 factor O2-Wide "Base Efficiency Numerator 2 - Fast"
    Last edited by VT LS1 NZ; December 1st, 2006 at 07:51 AM.
    856RWHP 408 Supercharged LS1 Holden Commodore.

  5. #5
    Junior Member
    Join Date
    Dec 2006
    Posts
    10

    Default

    Ive just ordered one a few days ago, liked how it takes both sensors and averages them out.
    Not sure when its due to arrive but im sure ill have it in the car the same day!

  6. #6
    Lifetime Member TAQuickness's Avatar
    Join Date
    Jan 2005
    Posts
    2,940

    Default

    Welcome to the Forum Rosco


  7. #7
    Junior Member
    Join Date
    Dec 2006
    Posts
    10

    Default

    Quote Originally Posted by TAQuickness
    Welcome to the Forum Rosco
    Thanks!
    Efilive has been so useful to me so far, ive just ordered a load of new parts for my LS1 so will be getting lots more use out of it soon!

  8. #8
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Quote Originally Posted by Rosco
    Thanks!
    Efilive has been so useful to me so far, ive just ordered a load of new parts for my LS1 so will be getting lots more use out of it soon!
    Rosco,

    Welcome. Let us know how it all goes.

    Joe

  9. #9
    Lifetime Member Doc's Avatar
    Join Date
    Oct 2005
    Posts
    744

    Default

    Yes please post more feedback on this unit.

    2000 Silverado Full Size 4x4: Forged 6.2, H/C F1R Procharger
    98A4 Z28: 02 PCM H/C Forged 347, 9" Moser 3.73
    V1 V2 99+up RR COS #5 OLSD Dual Stg N20
    www.efialchemy.com
    www.greatamericancarwar.com

  10. #10
    Member VT LS1 NZ's Avatar
    Join Date
    Apr 2003
    Posts
    79

    Default

    Quote Originally Posted by Rosco
    Ive just ordered one a few days ago, liked how it takes both sensors and averages them out.
    Not sure when its due to arrive but im sure ill have it in the car the same day!

    Hope you got it at a good price.I bought mine here only $50 dearer than two LC1's.

    http://www.compperformancegroupstore...?Store_Code=PH

    Look under "Tuning tools."
    856RWHP 408 Supercharged LS1 Holden Commodore.

Page 1 of 2 12 LastLast

Similar Threads

  1. Dual Fast Wideband
    By minytrker in forum General (Petrol, Gas, Ethanol)
    Replies: 0
    Last Post: February 18th, 2010, 03:37 PM
  2. FAST dual WB to EFI V1
    By rickou812 in forum External A/D inputs
    Replies: 3
    Last Post: November 19th, 2009, 08:06 AM
  3. need help installing fast dual wideband
    By red83 in forum General (Petrol, Gas, Ethanol)
    Replies: 15
    Last Post: December 19th, 2008, 06:01 AM
  4. FAST DUAL O2's
    By alz28 in forum Tutorials
    Replies: 20
    Last Post: August 28th, 2008, 05:54 PM
  5. dual fast 90 set up
    By minytrker in forum General (Petrol, Gas, Ethanol)
    Replies: 9
    Last Post: June 7th, 2006, 12:52 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •