thanks for the welcome!
i spoke too soon, however...
both the egr & the sender have different color wires than the wiring instructions...
sender has black, grey & blue
egr has brown, red, grey, purple & white
any suggestions?
thanks,
al
thanks for the welcome!
i spoke too soon, however...
both the egr & the sender have different color wires than the wiring instructions...
sender has black, grey & blue
egr has brown, red, grey, purple & white
any suggestions?
thanks,
al
Last edited by Superado; July 11th, 2008 at 01:34 AM.
Last edited by Superado; July 11th, 2008 at 01:39 AM.
forged LS1 I Patriot Stage III heads I Patrick G spec'd TR grind Comp Cam I ProCharger I High Tech Transmissions I Ultimate Converter Concepts I tuned by cablebandit (soon to be me) @ MSS I Exotic Exhaust & Fabrication custom exhaust
I have just found the egr harness info for the truck...thanks to cablebandit
from the gm dvd info on the egr harness,
brown 0-5
grey +5vdc
purple gnd
the pin config. of my sender...
http://shed51.com/sensors.htm
which is the same as the AutoMeter fp sender's configuration:
and the pic of my sender pigtail below,
we have come up with this...
sender/pigtail to egr harness
Blk (gnd) to purple (gnd)
Grey (+5vdc)to grey (+5vdc)
Blue (0-5) to brown (0-5)
Last edited by Superado; July 11th, 2008 at 04:01 AM.
forged LS1 I Patriot Stage III heads I Patrick G spec'd TR grind Comp Cam I ProCharger I High Tech Transmissions I Ultimate Converter Concepts I tuned by cablebandit (soon to be me) @ MSS I Exotic Exhaust & Fabrication custom exhaust
Good find. Sorry I wasn't able to get back to you sooner.
forged LS1 I Patriot Stage III heads I Patrick G spec'd TR grind Comp Cam I ProCharger I High Tech Transmissions I Ultimate Converter Concepts I tuned by cablebandit (soon to be me) @ MSS I Exotic Exhaust & Fabrication custom exhaust
OK...someone on LS1TECH caught this before you guys...
I was looking at the plug end of the pigtail the same as the sender's pin out, which is incorrect because it is actually a mirror of the sender...
The CORRECT connections are:
sender/pigtail to egr harness
Grey (gnd) to purple (gnd)
Blk (+5vdc)to grey (+5vdc)
Blue (0-5 signal) to brown (0-5 signal)
forged LS1 I Patriot Stage III heads I Patrick G spec'd TR grind Comp Cam I ProCharger I High Tech Transmissions I Ultimate Converter Concepts I tuned by cablebandit (soon to be me) @ MSS I Exotic Exhaust & Fabrication custom exhaust
it works!
and logs!
forged LS1 I Patriot Stage III heads I Patrick G spec'd TR grind Comp Cam I ProCharger I High Tech Transmissions I Ultimate Converter Concepts I tuned by cablebandit (soon to be me) @ MSS I Exotic Exhaust & Fabrication custom exhaust
question...
now that I have the egr reading fp...how do I turn off the SES light due to egr?
thanks
forged LS1 I Patriot Stage III heads I Patrick G spec'd TR grind Comp Cam I ProCharger I High Tech Transmissions I Ultimate Converter Concepts I tuned by cablebandit (soon to be me) @ MSS I Exotic Exhaust & Fabrication custom exhaust