They are designed for use in commercial refrigeration and air-conditioning applications.
I've had the AutoMeter sensor installed for a few years now and it still works.
Honestly I don't look at the PID too much tho.
They are designed for use in commercial refrigeration and air-conditioning applications.
I've had the AutoMeter sensor installed for a few years now and it still works.
Honestly I don't look at the PID too much tho.
512k RoadRunner Firmware 12.14R
FlashScan V2 Bootblock V2.07.04 Firmware V2.07.22 EFILive V7.5.7 (Build 191) V8.2.1 (Build 181)
LC-1 WBO2
_________________________________________________
looking for a connector that fits the egr valve connector has any one seen or heard of one,after hooking up my fuel pressure gauge to my egr plug(sliping wires in connector and testing it)I was thinking it would be nice for when I do customer's car's to have a egr connector for quick hook ups (so i am not cutting there wires)any ideas
Just got mine hooked up to my '01 Silverado. I used grey for 5V, purple for ground and brown for 0-5V signal. The colors were different than what the tutorial says.
Idle pressure is about 52 psi and is within 0.5-1.0 psi of what my mechanical gauge says. Overall I'd say it works pretty well!
2001 Silverado 5.3L ECSB 2WD T56:
T76 turbo, Meth injection, 72# injectors, 799 heads, 212/212 114LSA cam, Built 4L80E, 3.42's
EFILive V1 Commercial, COS5 2-bar SOLSD, AEM wideband