Results 1 to 4 of 4

Thread: V2 AFR display?

  1. #1
    Lifetime Member Bruce Melton's Avatar
    Join Date
    Oct 2003
    Posts
    674

    Default V2 AFR display?

    If one were to buy a new wideband without a display such as the new PLX and they configured the proper PIDs, would V2 display the current AFR on it's baby blue screen?
    Last edited by Bruce Melton; November 10th, 2006 at 05:58 AM.

    2000 C5 Coupe, 6M, Callies/Mahle stroked LS7 (441), Blackwing, Halltech, LS3 intake, 90mm Shaner TB, ported L92 heads, FAST 50# inj, not too much cam, Kooks 1 7/8" headers , 3" catless mid pipes, Z TIs, track suspension, , 3:90 rear, EFI V2, LM-2, etc.
    PowrMax Performance

    100 mm PowrMAF

    LM-2 EFILIve package with TAQ -sLM2 V-2 serial cable> Package deals

  2. #2
    Lifetime Member TAQuickness's Avatar
    Join Date
    Jan 2005
    Posts
    2,940

    Default

    I believe so. Of course, it will be much easier to configure if you have the WB controller so you have the linear 0-5vdc signal.

    I run dual LC-1's with no gauge just fine. Although I haven't attempted to view it on V2 yet.


  3. #3
    EFILive Crew Site Admin Tordne's Avatar
    Join Date
    Oct 2004
    Posts
    3,870

    Default

    It is planned, not yet though.
    Andrew
    EFILive Crew


  4. #4
    Lifetime Member Bruce Melton's Avatar
    Join Date
    Oct 2003
    Posts
    674

    Default

    What I am thinking is that this $200 WB:

    http://www.plxdevices.com/products_SMAFR.htm

    With V2 would be a cheap WB solution for tuning, serve as a stand alone WB of sorts as well as a selling feature for V2.

    2000 C5 Coupe, 6M, Callies/Mahle stroked LS7 (441), Blackwing, Halltech, LS3 intake, 90mm Shaner TB, ported L92 heads, FAST 50# inj, not too much cam, Kooks 1 7/8" headers , 3" catless mid pipes, Z TIs, track suspension, , 3:90 rear, EFI V2, LM-2, etc.
    PowrMax Performance

    100 mm PowrMAF

    LM-2 EFILIve package with TAQ -sLM2 V-2 serial cable> Package deals

Similar Threads

  1. How to display names on DIC
    By LBZoom in forum General (Diesel)
    Replies: 9
    Last Post: April 15th, 2009, 10:30 AM
  2. Can't display more than 99,000 frames
    By XLR8NSS in forum General
    Replies: 6
    Last Post: July 11th, 2008, 06:47 AM
  3. Can't display in metric
    By hquick in forum General (Petrol, Gas, Ethanol)
    Replies: 2
    Last Post: April 16th, 2008, 12:51 AM
  4. self test, display
    By Wolfie in forum FlashScan V2
    Replies: 1
    Last Post: April 15th, 2008, 10:01 AM
  5. scantool display to use as dash display?
    By ace68 in forum Lounge
    Replies: 0
    Last Post: March 3rd, 2006, 05:50 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •