-
Car Dieing...
Hello,
I'm tuning a '04 GTO automatic, with FAST 90mm intake, NW TB, AFR 225 Heads, 3600 stall, and a cam w/ duration@ .050: int. 233 ext. 241. The car idles good, I've done the AutoVE tuning, and the car runs great. When I crank the car up and go for a drive, when I coming to a stop and it gets to about 4 or 5 mph the car will just die. I have even tryed to hold the throttle up with the peddle and it still dies. I've played around with the throttle cracker and throttle follower and none of the changes there seem to make any difference at all! Is there a table that I'm over looking? Any help would greatly be appreciated!
Thanks, Coleman
-
EFILive Crew
Site Admin
Have you tuned the Desired Airflow table (B4307) yet? You may also like to look at the decay rates for both the Throttle Cracker and Follower.
Andrew
EFILive Crew
-
I've done some tuning there. How much do you think I should add or take away from the decay rates?
-
EFILive Crew
Site Admin
It will probably be experimenting.. Perhaps reduce by 20% and see what effect that has.
Andrew
EFILive Crew
-
Thanks for the reply! I will try this Monday and see what I come up with.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules