Anyone help me out with my Questions?
Other option is set it to a 12V gauge and have it turn green in Alarm for indication?
Be nice if this was available as a status function (or is it and I am missing something).
Anyone help me out with my Questions?
Other option is set it to a 12V gauge and have it turn green in Alarm for indication?
Be nice if this was available as a status function (or is it and I am missing something).
1999 C5 A-4 Convertible
1 of 245 Nassua Blue 99 Vert's, Blackwing, LS6 Intake, 42 # Injectors, Two Stage Nitrous System- Dry and a Wet Plate, EFI Live Scan/Tune V2, 1999 PCM with 2002 COS 5 OS Custom Nitrous Panel.
Maine USA
No, its not availabel as a status.
It is available as a "guage" or "chart" pid that can take the value 0 or 1.
Regards
Paul
Before asking for help, please read this.
So for a status like effect, set the alarm to Green on the gauge, set 1 as the value for alarm, and when activated, set all the colors to black other than alarm.
Seems to me, the status function would be more suited for this application
What about the wiring, + pin 87 to the V2 + and no ground needed because the V2 is grounded?
1999 C5 A-4 Convertible
1 of 245 Nassua Blue 99 Vert's, Blackwing, LS6 Intake, 42 # Injectors, Two Stage Nitrous System- Dry and a Wet Plate, EFI Live Scan/Tune V2, 1999 PCM with 2002 COS 5 OS Custom Nitrous Panel.
Maine USA
Posting Permissions
Reply With Quote