Stock GEN IV Files

[VortechC5]

Oops, I forgot to send the files to Tordne. Sorry for the delay.

I just sent them to him to be added to Holden Crazy.

[CarbConn]

We did a LS3. EFIlive does not recognize this LS9 auto Camaro.

Thanks.

Alex

[joecar]

We did a LS3. EFIlive does not recognize this LS9 auto Camaro.

Thanks.

Alex

Hi Alex, what are your V7.5/V8.1 software build numbers...?

[Tordne]

That calibration you sent via email is supported with the latest pre-release version 7.5.6 Build 107 available here (http://forum.efilive.com/showthread.php?t=13140).

Also download the 8.1.2. Build 87 release and update firmware to 2.06.28. Also get the ZIP file in post # & of that thread and extract to the location shown in that post.

[joecar]

That calibration you sent via email is supported with the latest pre-release version 7.5.6 Build 107 available here (http://forum.efilive.com/showthread.php?t=13140).

Also download the 8.1.2. Build 87 release and update firmware to 2.06.28. Also get the ZIP file in post # & of that thread and extract to the location shown in that post.

Yes get the zip file from post #7: http://forum.efilive.com/showpost.ph...40&postcount=7

[CarbConn]

Thanks guys, it worked!

[bfabiano]

can you tell me if this controller is supported. 2006 C6 Auto trans vin#********

[Tordne]

I can advise that the E38 T43 controllers used by that VIN (which I've removed) are supported by FlashScan V2 Scan and Tune.

[joecar]

can you tell me if this controller is supported. 2006 C6 Auto trans vin#********

That VIN has had the following OS updates:
12600132 - not supported by EFILive (Main Operating System)
12601696 - not supported by EFILive (New software for start of production)
12602922 - supported by EFILive (New software to correct problem occurring at the assembly plant. Does not address any service issues.)
12605196 - not supported by EFILive (New software to eliminate erroneous "Max speed 158 mph" DIC message.)
12605732 - supported by EFILive (New software to ensure proper catalyst monitoring.)
12614682 - supported by EFILive (New software contains diagnostics enhancement for DTC P0128 and DTC P0507. Also addresses battery drain.)

If he has one of the non-supported OS, he should be able to upgrade any non-supported OS to the latest OS.
Plus, any dealer should upgrade his ECM to 12614682 whenever it goes in for a service.
...

bfabiano,

EFILive supports the vehicle you enquired about (VIN provided by you).

However, you may have to upgrade to a supported OS... the latest one is 12614682.

Goto http://tis2web.service.gm.com/tis2web and enter your VIN, select PCM/VCM and click Next...
you will see what the dealer will upgrade your OS/calibrations to (the latest one is at the top, 12614682).

[odd boy]

Per the GM TIS web site, that VIN should have one of the two following operating systems:

VIN:1G1YY24U955100573
Controller:PCM/VCM
Powertrain/Vehicle Control Module Calibration History for: Main Operating System
Part Number

• 12613186
• 12605740

Both of those operating systems are supported by the current EFILive software.

I am not sure why your vehicle is showing 12595751 as an operating system. Are you sure you are looking at the correct file tab because that part number is the speedometer calibration file part number for your vehicle. Are you using the latest EFILive software that supports E40?

If you are still having these issues I would get your vehicle flashed by a dealer to the latest stock calibration files and that should give you the correct operating system (or you can do it yourself if you have the software/hardware to do so).

If you had a stock EFILive calibration with ALL the correct files for that vehicle, you could also use EFILive to update the vehicle.

BTW - anyone can check what the correct files are for a specific VIN GM vehicle by going to:

http://tis2web.service.gm.com/tis2web



Jason

good info