Problems with upgrading V2 from scan only to scan and tune...
I'm having a difficult time upgrading the device from scan only to scan and tune. I've updated the FlashScan files and after entering the upgrade code it continues to say that it is a scan only device. I was able to get the code to enter a few times and it said that the upgrade was complete and to restart the program, but it still seems like it hasn't actually updated, and now every time I try to enter it I get an error that the code is incorrect.
Is anyone else having these issues?
Make sure you get the date right. Everybody seems to mess up when entering the date.
www.socaldiesel.com
EFILive-DSP5......Switch your Attitude!
EFILive-CSP5......The Smart Way To Switch Your Cummins Tunes!
EFILive-DSP4......Switch Your Colorado and Canyon Too!
As far as I can tell the date is fine. The email said 20061122 so I entered 22 Nov 2006. The FlashScan itself is fine. The problem is when I go into the "FlashScan V2 Licensing" menu and try to do the upgrade. At first it was giving me problems, so I tried switching to lower case and it said upgrade completed, restart the software. I did that and nothing in the V2 Licensing menu had changed. It still says it is a scan only device. Tried this a few more times and was successful a few times just as the first time, but after the restart the license status was still the same. Now it just says the code is wrong every time.
I had a similiar problem with V1,
Chad had me delete C:\Documents and Settings\USER\My Documents\EFILive\V7\User Configuration\license.txt and then re-enter the info, that solved it in my case.
1999 C5 A-4 Convertible
1 of 245 Nassua Blue 99 Vert's, Blackwing, LS6 Intake, 42 # Injectors, Two Stage Nitrous System- Dry and a Wet Plate, EFI Live Scan/Tune V2, 1999 PCM with 2002 COS 5 OS Custom Nitrous Panel.
Maine USA
What version/build number are you using on the software?
Im having similar problems... Its telling me check the upgrade code again.
V7.3.3 Build 525
My firmware programmer is V2.04.02 (build 32)Originally Posted by DngrZne
Sorry about the confusion guys. I didn't even think about the firmware update. The update is included in the 525 release that addresses issues with not being able to upgrade from scan only to scan and tune. It will be available to the public here soon.
You will need to enter dead poll on the interface before you can upgrade the firmware. The instructions on how to do this are in the manuals..
Sorry again for the troubles guys.
Where does one get V7.3.3 Build 525? I have build 520 posted earlier (andcame on the V2 CD). Are there any fixes, and what's the difference between the 2.4.38 and the 2.4.39 V2 firmware?
Posting Permissions
Reply With Quote
